ONTAP Select
ONTAP Select
Other Resources
- Cannot see Capacity Pool License in DeployThu, 02 Jan 2025
- An expired license disable the HA funcionality?Fri, 27 Dec 2024
- ONTAP Select: OTS node fails due to disk failures within the backing hostTue, 10 Dec 2024
- OTS: Recurring RDMA down issuesTue, 03 Dec 2024
- CDEPLOY-2361: ONTAP Select is missing protocol licensesThu, 28 Nov 2024
- ONTAP Select is missing protocol licensesWed, 27 Nov 2024
- ONTAP Select VM deploy failure: The host does not have sufficient CPU resources to satisfy the reservationMon, 18 Nov 2024
- Capacity pool licenses cannot be installed directlyTue, 05 Nov 2024
- System Manager shows error monitor.globalstatus.critical after both nodes rebootFri, 01 Nov 2024
- "Error retrieving Host information" while loading ESXi details in ONTAP DeployThu, 31 Oct 2024
- ONTAP Select upgrade an evaluation license failWed, 30 Oct 2024
- ONTAP Select: OTS cluster node unable to boot due to low CPU frequency settingTue, 29 Oct 2024
- After reboot ONTAP Select aggregate is offline due to expired LicenseTue, 29 Oct 2024
- Why is our aggregate filled up?Mon, 28 Oct 2024
- How to create mirrored data aggregate on ONTAP SelectMon, 28 Oct 2024
- Operation of the ONTAP Select trial licenseMon, 21 Oct 2024
- Are there any version types or feature limitations for ONTAP SelectMon, 21 Oct 2024
- Error upgrading ONTAP Select DeployTue, 15 Oct 2024
- Resize the root aggregate in ONTAP selectTue, 15 Oct 2024
- CONTAP-208847: VSA shows black screen on VM's web console in vSphere when serial console is configured.Thu, 10 Oct 2024
- CONTAP-276058: ONTAP Select single node running ESX version 8.0U3 fails to boot up.Thu, 16 Jan 2025
- Licensing services on ONTAP Select node are unavailable due to network error with License Manager on DeployFri, 10 Jan 2025
- ONTAP Select: License Renewal has been updated in Deploy but not in ONTAPWed, 08 Jan 2025
- How ONTAP Select capacity license is being calculated with partitions and non-zero raid configurationTue, 07 Jan 2025
- ONTAP Select is missing protocol licensesMon, 06 Jan 2025
- Cannot see Capacity Pool License in DeployThu, 02 Jan 2025
- ONTAP Select: license.sfo.gb.veto.eval: SFO giveback vetoed. Evaluation period endedTue, 31 Dec 2024
- How to add licensed capacity to ONTAP Select in Deploy?Mon, 30 Dec 2024
- How to increase capacity for ONTAP Select HA ClusterMon, 30 Dec 2024
- ONTAP Select: How to increase the capacity of a Capacity Tier LicenseMon, 30 Dec 2024
- An expired license disable the HA funcionality?Fri, 27 Dec 2024
- How to enable ONTAP Serial Console on ONTAP Select VMWed, 25 Dec 2024
- CDEPLOY-2361: ONTAP Select is missing protocol licensesMon, 16 Dec 2024
- ONTAP Select (SYNCMIRROR PLEX FAILED) Takeover initiated due to network partitioningMon, 16 Dec 2024
- OTS: Network connectivity Checker is failingFri, 13 Dec 2024
- ONTAP Select cluster refresh completed with errorsThu, 12 Dec 2024
- CONTAP-295953: ONTAP Select single node running ESX version 8.0U3 fails to boot upWed, 11 Dec 2024
- CONTAP-84141: ONTAP Select/Simulate ONTAP 9.13.1 video console appears to hang during bootWed, 11 Dec 2024
- ONTAP Select: OTS node fails due to disk failures within the backing hostTue, 10 Dec 2024
- CONTAP-208847: VSA shows black screen on VM's web console in vSphere when serial console is configured.Mon, 09 Dec 2024
- Configure SVM Disaster Recovery(DR) using OnCommand System Manager 9.5
- How to create a custom role for OCSM in clustered Data ONTAP 8 3
- How to collect logs for troubleshooting OnCommand System Manager issues
- How to modify the OnCommand Balance UI timeout session
- How to offload and import a database in OnCommand Balance
- ONTAP Select Issues
- CDEPLOY-1427: ONTAP Select Deploy - Cluster Refresh picks up incorrect gateway IP address
- CDEPLOY-2361: ONTAP Select is missing protocol licenses
- CONTAP-107870: ONTAP Select RDMA down
- CONTAP-115269: /var: filesystem full caused by excessive ctld.log logging
- CONTAP-117042: ONTAP Select unable to detect drive type change from SSD to HDD
- CONTAP-208847: VSA shows black screen on VM's web console in vSphere when serial console is configured.
- CONTAP-208852: Giveback fails with drive type mismatch (VMDISK/SSD) between nodes in ONTAP select.
- CONTAP-276058: ONTAP Select single node running ESX version 8.0U3 fails to boot up.
- CONTAP-295953: ONTAP Select single node running ESX version 8.0U3 fails to boot up
- CONTAP-81552: ONTAP cluster node reboots unexpectedly
- CONTAP-84141: ONTAP Select/Simulate ONTAP 9.13.1 video console appears to hang during boot
- CONTAP-95684: ctld.log is not properly rotated which leads to filled up /var
- CONTAP-96706: NVMe controller Reset on ONTAP node during write operations may lead to node disruption
- ONTAP Select KBs
- "Error retrieving Host information" while loading ESXi details in ONTAP Deploy
- (SYNCMIRROR PLEX FAILED) ALERT two-node OTS Cluster
- Add ONTAP Select capacity tier license failed with error
- After reboot ONTAP Select aggregate is offline due to expired License
- After updating ONTAP Select, Deploy stopped logging into ESXi
- After upgrade of ONTAP Deploy, hosts not visible
- After upgrade to ONTAP 9.7, system fails to boot with error 'NVDIMM Driver load failed'
- After Upgrading ESXi to version 7update 3, ONTAP Select RAID resync is getting aborted after 51%
- Aggregate not compliant with Capacity Pool entitlement
- aggregate reallocate error: Failed to create schedule
- Aggregate remains offline after reboot due to licensing services being unavailable
- All nodes in the cluster should have minimum of X TB capacity to modify cluster license
- An error occurred while trying to find preexisting virtual interfaces
- An expired license disable the HA funcionality?
- Are ONTAP security advisories relevant to ONTAP Select?
- Are there any requirements for Debian 11 in a SAN configuration with ONTAP Select?
- Are there any version types or feature limitations for ONTAP Select
- Autosupport is not available for ONTAP Select when using capacity pool license serial
- A Select licence cannot be installed on a system that is currently using the capacity pools licencing model
- Backend Dell server experiences power outage causing ONTAP select WAFL inconsistency
- BadPoolAssign error during ONTAP upgrade
- Bad SIS metafile block triggers WAFL inconsistency alert
- Cannot add capacity to ONTAP Select from Deploy Tool
- Cannot detach disk from ONTAP Select Deploy in a non-SWRAID configuration
- Cannot enable SIDL on object packing enabled aggregate
- Cannot increase NVMe namespace capacity
- Cannot resize storage in ONTAP Deploy after adding additionalSSDs
- Cannot see Capacity Pool License in Deploy
- Can AFF-like personality be enabled on ONTAP Select
- Can an ONTAP Select license be converted to a ONTAP One License?
- Can a single node ONTAP Select be converted into an HA pair?
- Can Deploy create multiple clusters simultaneously?
- Can direct-attached storage (DAS) ONTAP Select and Deploy instances be vMotioned when upgrading ESX firmware?
- Can IPv6 be disabled on the ONTAP Select Deploy Instance?
- Can I change the timezone in ONTAP Deploy?
- Can i enable tiering policy only on destination in an SVM-DR relation?
- Can I manually download an OVF from OTS to setup a cluster remotelly?
- Can I move ONTAP Select VMs to a different ONTAP Select Deploy utility?
- Can ONTAP deploy vm manage clusters that reside in 2 different vCtrs?
- Can ONTAP Select be downsized to a smaller instance type?
- Can RDMs from third party storage be attached directly to Select as VMWare disks?
- Can't add more space to ONTAP Select nodes
- Can VMware Tools be updated in ONTAP Select?
- Can we deploy ONTAP Select on KVM hosts with Rocky Linux?
- Can we increase the storage directly by modifying the ONTAP Select VM?
- Can we install ONTAP Select on a KVM virtualization environment?
- Capacity pool licenses cannot be installed directly
- Capacity pool license is not showing a cluster in the Licenses section of Deploy
- Changing ONTAP Select instance size from Deploy CLI
- ClusterDeployFailed because of unsupported MTU Size
- Cluster Deploy failed NodePoweredOnFailed on one or more nodes
- Cluster image cannot be uploaded on ONTAP Select
- Cluster license modify cannot be performed on licensed cluster
- Cluster Network Degraded alerts in an ONTAP Select HA Environment
- CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected
- Cluster refresh fails in Deploy 9.8 with "Node license refresh failed" error
- Cluster refresh fails in ONTAP Select due to identity mismatch
- Cluster Refresh is failing from ONTAP Deploy image not found 9.12.1P4
- Cluster Refresh Operation Fails After Modifying Cluster Name
- Cluster refresh operation in Deploy fails to update version of Select after upgrade
- Cluster refresh operation on the ONTAP Select failing after deploy upgrade
- Cluster refresh operation on the ONTAP Select starts failing after changing ESXi root password
- Cluster Refresh or Edit Node Storage from Deploy UI fails due to ONTAPCredentialCheckFailed
- Cluster Refresh took node offline in ONTAP Deploy but not VCenter
- Cluster update After node reboot: Update is not in "paused" state
- Cluster went missing from capacity pool lease after adding new capacity license
- Cluster went offline after migrating deploy vm
- Console displays "...Err: Gateway Time-out" during ONTAP Select Deploy upgrading
- Converting ONTAP Select to production license fails with "Failed to retrieve cluster identity from ONTAP" error
- Counter collection is disabled for certain objects in ONTAP Select
- Credential authentication failed with: HostConnectionFailed
- Delete of deploy affect the ONTAP select service?
- Deploy API service is currently not available. (Press Ctrl-C to continue to the shell)
- Deploy API service is currently not available upon a VMotion
- Deploy can not manage the ONTAP Select OS
- Deploy does not show ESX hosts in GUI
- Deploy GUI shows "Cluster is in a degraded state."
- Deploy OTS on VMware vSAN fails with error "File system specific implementation of Ioctl file failed"
- Deploy restore version mismatch
- Deploy upgrade failed as datastore ran out of space
- Deploy upgrade failed when using DAR over NODAR image
- Destination Host "vCenter.company.com" is unreachable
- dev.driver.throttling:notice message coupled with high latency on ONTAP Select
- Disk is marked as failed in ONTAP Select
- Does ONTAP Select support NDMP?
- Does ONTAP Select support Storage vMotion?
- Errors during boot procedure after ONTAP Select update
- Error 400 CredentialAuthenticationFailed while adding KVM host
- Error during configuration of vnics: InvalidRequestFault
- Error during snaplock licensing process: "The cluster ID is not valid."
- Error occurred while taking a snapshot: Failed to quiesce the virtual machine
- Error updating ONTAP to version 9.12.1P8
- Error upgrading ONTAP Select Deploy
- Error while adding new disks on ONTAP Select cluster
- Error: command failed: Aggregate mirroring would fail for aggregate "aggr1" while in takeover
- Error : Can't find label CLENUP at /opt/netapp/lib/DVADMIN/VM.pm
- ESXi hosts and ONTAP Select not discovered by Deploy after migration to new vCenter
- Extra pre-cautions when working with ONTAP Select VM's
- Failed Node status in ONTAP Deploy GUI
- Failed to add capacity for ONTAP Select with error NodeVMNotFound
- Failed to add disk to ONTAP Select aggregate. Operation would exceed capacity license
- Failed to add mirror disk in ontap select : StorageAddFailed
- Licensing services on ONTAP Select node are unavailable due to network error with License Manager on Deploy
- Failed to obtain HTTP lease for vmdk upload
- Fails to create ONTAP Select 9.10.1 via ONTAP Select Deploy 9.8
- Fail to expand ONTAP Select capacity
- FAQ - Hardware Requirements of an ONTAP Select Virtual Machine
- File clone operation may timeout with error code 222
- Flexgroup volume snapshot operation failed with volume busy error
- Getting Alphanumeric license keys when given NLF keys
- Giveback/Takeover of a Fabric Pool aggregate fails, but fabric pool destination is pingable from home node
- HA Group Notification from 'Node-Name' (PARTNER DOWN, TAKEOVER IMPOSSIBLE )
- HA interconnect down on ONTAP Select
- HA interconnect issues on ONTAP Select after VMWare Upgarde
- High CPU load is reported for only one ONTAP Select VM in VMware
- High latency on ONTAP select due to backend disks
- High load of the cpu and disks due to a snapmirror full resync and snapshot scanner
- HostNotFound error after migrating to new vCenter
- HostVMLookupFailed: Failed to look up VM information on host
- How ONTAP Select capacity license is being calculated with partitions and non-zero raid configuration
- How to add capacity to a local tier (add disks to an aggregate) for ONTAP Select?
- How to add licensed capacity to ONTAP Select in Deploy?
- How to Backup and Restore the ONTAP Select Deploy VM
- How to calculate the overhead of storage pool based on the desired capacity when deploy a new ONTAP Select cluster or add capacity to an existed cluster
- How to convert Deploy vmnic from E1000 to VMXNET3
- How to convert vmnics from E1000 to VMXNET3 on VMs upgraded to ONTAP Select 9.5
- How to convert vNVRAM disk driver from SCSI to vNVME
- How to correct ONTAP disk pool assignments in virtual ONTAP environments?
- How to create a Read Only User in ONTAP Select Deploy
- How to create mirrored data aggregate on ONTAP Select
- How to enable ONTAP Serial Console on ONTAP Select VM
- How to free up a license
- How to import custom CA or Self signed certificates to ONTAP Select Deploy?
- How to increase capacity for ONTAP Select HA Cluster
- How to manage vCenters in ONTAP select deploy
- How to map a disk in OTS to its VMWare VMDK
- How to migrate an ONTAP Select cluster and reuse the same tiers license
- How to migrate ONTAP Select across vCenters
- How to migrate ONTAP Select deploy tool to a new VM machine
- How to modify Cluster- or Node-mgmt IP in ONTAP Select
- How to modify Hypervisor Hosts IP in the ONTAP Select Deploy
- How to Perform a Cluster Refresh in Select Deploy
- How to reclaim capacity tier license in ONTAP SELECT by removing aggregate
- How to reduce the storage capacity consumed by an ONTAP Select Cluster
- How to regenerate the capacity pool license
- How to remove an ONTAP Select VM from the ONTAP Deploy VM
- How to replace damaged vmdk in ONTAP Select HA
- How to shutdown ONTAP Select Deploy server
- How to stop the rollback of a failed Select deployment
- How to swap a license already assigned to an existing ONTAP Select node
- How to trigger a coredump to a hung ONTAP Select node
- How to upgrade a ONTAP Select Cluster and Deploy Instance?
- How to upgrade ONTAP Select nodes
- How to upgrade VM hardware version on ESXi
- How to use esxtop to troubleshoot OTS issues
- How to verify whether Deploy was installed with DAR or NODAR image?
- If VMware tools can be installed in ONTAP Select OS
- Impossible to perform an action on a cluster from ONTAP Select Deploy
- Incorrect storage disk pool information after adding additional storage capacity to OTS node
- Invalid Input: License Lock Id in license_file does not match
- Invalid login error when installing ONTAP Select 9.2 and Deploy 2.5
- Is Azure Stack HCI supported with ONTAP Select Deployment
- Is Flash Pool supported with ONTAP Select
- Is it able to configure to separate vCenter for ONTAP Select cluster and ONTAP Deploy VM?
- Is it allowed to rename an ONTAP Select node?
- Is it possible for ONTAP Select to increase the size of volume or aggregate when it's not connected to ONTAP Select Deploy?
- Is it possible to add more than 8 vCPUS on ONTAP Select?
- Is it possible to add vCPUS and memory on ONTAP Select VM?
- Is it possible to backup a ONTAP Select VM using VMWare API calls
- Is it possible to change ONTAP Select serial number?
- Is it possible to install external agents or applications in ONTAP Select OVA VM
- Is it possible to rebuild a failed aggregate in ONTAP Select?
- Is it possible to recover lost ONTAP Select Deploy admin credentials?
- Is it safe to detach an ISO image on my ONTAP Select host?
- Is it safe to detach an ISO image on my ONTAP Select host to vMotion it?
- Is root access required to add a KVM host to ONTAP Select?
- Is SRM 9.0 supported in OTV?
- Is there a way to do cluster license modify or storage add without providing Cluster username and password?
- Is there a way to enable snapshot autodelete for Trident volumes?
- Is there a way to migrate an ONTAP Select VM to be managed under a different ONTAP Select Deploy VM?
- Does Upgrade Advisor support ONTAP Select?
- Is VSAN 8.0 supported with ONTAP Select 9.10.1?
- LIFs down during ONTAP Select single node upgrade
- LIF failover was not initiated along with storage failover
- Low write throughput and high NVRAM latency in ONTAP Select
- Modifying DNS configuration of ONTAP Deploy instance
- Multi-disk fail on OTS
- NetApp ONTAP Select vNAS solution for VMware vSAN
- NetSchedHClkPortQuiesce impact on ONTAP Select
- New NLF Doesn't Restore Capacity From An Expired NLF
- New ONTAP select deployment continuously panics
- New RAID group is not available in Deploy to expand capacity
- New X1153 NIC card cannot be configured correctly
- NFS datastore does not reconnect when vCenter VM is down
- NFS share not available after reboot
- Node panic and reboot following upgrade
- Node Root Volume Space Nearly Full messages in ONTAP Select
- Nonidentical vmware directory stracture
- Not able to retrieve image through network Error: Connection reset by peer or Timeout
- No expiration date showing for licenses in ONTAP Select CLI
- NVMe-SSD disk size small then expect after deploy in ONTAP Select
- Object store shows unavailable
- Object store unavailable causing replication failure
- One OTS node cannot ping IP form remote node
- ONTAPClusterCreateJoinOperationFailed because of slow backend storage
- ONTAPClusterCreateTimedOut: ONTAP cluster create timed out
- ONTAP cluster unable to boot at all
- ONTAP Deploy CLI is not showing correct ONTAP Select cluster version
- Ontap Deploy cluster creation fails with image checksum mismatch
- ONTAP Deploy shows a different "Current Capacity" than what is actualy used
- ONTAP Deploy unable to Create Cluster with MTU size error
- ONTAP Deploy upgrade failed. Reason: Failed to generate License Manager
- ONTAP Deploy VM hung with Error "Probing EDD"
- ONTAP Deploy: Backup restore fails with error "Connection refused"
- ONTAP Deploy: GUI would show the host as greyed out, with a message to refresh:fail
- ONTAP Deploy: How to perform a Host Refresh
- ONTAP Deploy: Upgrade fails on license-manager setup
- ONTAP Select: How to recover a failed OTS Cluster node
- ONTAP Select: Node Panic during upgrade to 9.11.1P16
- ONTAP Select: OTS node fails due to disk failures within the backing host
- ONTAP Select: OTS cluster node unable to boot due to low CPU frequency setting
- ONTAP Select - Broken disk causes SyncMirror Plex failure
- ONTAP Select - Cannot online aggregate or plex (License has expired)
- ONTAP Select aggregate remained offline after a switch failure
- ONTAP Select - Aggregate restricted, WAFL inconsistent after VMware SCSI adapter order change
- ONTAP Select capacity license fail to take effect after added
- ONTAP Select capacity license is not properly calculated
- ONTAP Select clusters with identical serial numbers
- ONTAP Select cluster create fails during node deployment with error errType=RestrictedVersion
- ONTAP Select cluster creation in Deploy is failing
- ONTAP Select cluster deployment results in 'NodeNotPingable' error message
- ONTAP Select cluster deploy fails with InvalidCPUSpeed
- ONTAP Select Cluster node Resize fails due to 'NodeStopFailed'
- ONTAP Select cluster not serving data and is offline
- ONTAP Select cluster refresh completed with errors
- Ontap Select Cluster Refresh failure with error:"object is not subscriptable"
- ONTAP Select cluster refresh impossible
- ONTAP Select cluster throwing vm_fault pager read errors in the vCenter console
- ONTAP Select cluster unreachable
- ONTAP Select create aggregate's plexes 0 and 1 from the same node
- ONTAP Select creation failing due to networking issue
- ONTAP Select deployment succeeds but fails to boot
- ONTAP Select Deploy - License Lock ID is missing
- ONTAP Select Deploy - ONTAP cluster create failed during cluster join operation
- ONTAP Select Deploy - The checksum(s) from the provided manifest file do not match the content of file(s)
- ONTAP Select Deploy - Unable to select Network when creating Cluster
- ONTAP Select Deploy - Unable to select Network when creating Cluster on KVM host
- ONTAP Select Deploy - unwanted Select cluster stuck in post deploy setup
- ONTAP Select Deploy "Adding Storage" Job is stuck
- ONTAP Select Deploy always halts during installment
- ONTAP Select Deploy API Functionality gets frozen
- ONTAP Select Deploy can not create the node following: Unable to mark VM disks independent-persistent
- ONTAP Select Deploy can´t take offline
- ONTAP Select Deploy doesn't boot after update
- ONTAP Select Deploy does not automatically refresh cluster information - a manual cluster refresh is always needed
- ONTAP Select Deploy does not refresh cluster w/ updated host
- ONTAP Select Deploy Error retrieving Host information
- ONTAP Select Deploy failed cluster expansion
- ONTAP Select Deploy fails to create a cluster
- ONTAP Select Deploy GUI authentication login not working even with correct password
- ONTAP Select Deploy GUI error: Failed validating 'type' in schema
- ONTAP Select Deploy GUI not displaying network port group in dropdown
- ONTAP Select Deploy is unable to see any ESXi Host when using ELM vCenters
- ONTAP Select Deploy plug-in registration fails with VMware vCenter Server ESXI 8.0
- ONTAP Select Deploy shows ESXi host as greyed out
- ONTAP Select Deploy upgrade failed with error: Deploy upgrade failed
- ONTAP Select Deploy upgrade fails with error - UpgradeUntarErr: Failed to extract
- ONTAP Select Deploy upgrade: No space left on device
- ONTAP Select Deploy: Aggregate not reporting correct disk type
- ONTAP Select Deploy: CLI reports wrong pool available capacity after svmotion
- ONTAP Select Deploy: ClusterDeleteFailed - Failed to delete cluster
- ONTAP Select Deploy: Network connectivity checker fails to get host credentials
- ONTAP Select Deploy: New OTS Cluster management IP not changing in Deploy
- ONTAP Select Deploy: NodeDetachDiskFailed as a result of dupe VMDKs in the Deploy disk inventory
- ONTAP Select Deploy: Unable to expand aggregate
- ONTAP Select deploy: Unable to re-register an ESXi host to a different vCenter server
- ONTAP Select Disk Cannot Be Detached from Node - Deploy Versions 9.12.1 and Earlier
- ONTAP Select does not boot after upgrading to VM HW v19
- ONTAP Select failover is disabled as some aggregates are degraded or unmirrored
- ONTAP Select fails to boot due to "Illegal instruction"
- ONTAP Select file shares are not accessible and discovered node down
- ONTAP Select for IceLake processors support - The operating system has halted
- ONTAP Select giveback fails with"In takeover, Auto giveback deferred"
- ONTAP Select giveback vetoed by raid and partner iSCSI sessions up/down
- ONTAP Select has higher latency than other ONTAP Select systems
- ONTAP Select HA INTERCONNECT DOWN Takeover is not possible NVRAM log not synchronized
- ONTAP Select instance goes unexpectedly into takeover
- ONTAP Select instance listed offline in ONTAP Select Deploy
- ONTAP Select instance rebooted due to partial write failure
- ONTAP Select is missing protocol licenses
- ONTAP Select lease-missing and aggr not compliant with current Capacity Pool
- ONTAP Select license show 'non-compliant' and 'lease-missing' on data aggregates
- ONTAP Select manually added disks via VMware are seen as broken
- ONTAP Select migration to new vCenter fails with Takeover is not possible error
- ONTAP Select: Network connectivity Checker quick check fails on new deployment
- ONTAP Select Node, Boot Loop or Shutdown After Update VMware 8.0U3
- ONTAP Select nodes will not boot due to power outage
- ONTAP Select node 9.13.1 appears to hang during boot
- ONTAP Select node boot error Waiting for requisite number of Mailboxes
- ONTAP Select node boot error: Operating System not found
- ONTAP Select node deploy fails with NodeNotPingable
- ONTAP Select node deploy fails with no NIC can be discovered
- ONTAP Select Node fails to boot 9.9.1 due to "Illegal instruction"
- ONTAP Select node gives "Access restricted to authorized users" after a storage VMotion with node booted
- ONTAP Select Node goes into hung state
- ONTAP Select: Node panic 'prod/kmod/freebsd/simnv/simnv.c:6594: Assertion failure'
- ONTAP Select node powered off on its own: not enough space on the file system
- ONTAP Select node reboots unexpectedly after Long CP and vNVRAM flush delay
- ONTAP Select node stuck at VLOADER
- ONTAP Select node unable to boot as /mroot not mounted
- ONTAP Select Node Unexpectedly Restarted
- ONTAP Select node VM recovery in case of disaster
- ONTAP Select not booting after VMware ESXi upgrade to version 6.5
- ONTAP Select not saving 28 days of Performance Archives
- ONTAP Select NVRAM log not synchronized for one node
- ONTAP Select nvram panic
- ONTAP Select or CVO giveback vetoed because aggr is being resynced
- ONTAP Select or CVO: Aggregate mirroring would fail due to "Not enough matching spare disks"
- ONTAP Select (OTS): Node panics due to heartbeat failure
- ONTAP Select panic while processing a NVMe command
- ONTAP Select reports Error: Mailbox disks are not healthy
- ONTAP Select reports "spin lock (CCMA-Worker) too long. VM may have been paused"
- ONTAP Select - ROOT VOLUME NOT WORKING PROPERLY: RECOVERY REQUIRED
- ONTAP select serving LUNs may panic when high amount of data is written to datastore
- ONTAP Select - StorageAddFailed. Reason: cannot create virtual disk
- ONTAP Select Storage failover not possible : NVRAM log not synchronized
- ONTAP Select SYNCMIRROR PLEX FAILED due to back-end array issues
- ONTAP Select SYNCMIRROR PLEX FAILED due to failed disks
- ONTAP Select SYNCMIRROR PLEX FAILED due to networking issues
- ONTAP Select systems have duplicate system IDs
- ONTAP Select System Manager shows 0 Bytes Available
- ONTAP Select system shutting down unexpectedly
- ONTAP Select system went offline after LUNs went offline
- Ontap Select throws error after vMware vMotion "config_failed_disk: callhome.disks.missing:error]: Call home for MULTIPLE DISKS MISSING"
- ONTAP Select unlicensed VE license after NLF renewal
- ONTAP Select Update of the cluster was paused because of errors, post-update checks
- ONTAP Select upgrade an evaluation license fail
- ONTAP Select upgrade fails to boot with VMXNET3 and e1000 error
- ONTAP Select upgrade fails with license error
- ONTAP Select virtual machine fails to boot after upgrading to VMware ESXi 6.5
- ONTAP Select VMDISK seen as broken
- ONTAP Select VM deploy failure: The host does not have sufficient CPU resources to satisfy the reservation
- ONTAP select VM fails to boot on “Ice Lake” CPUs
- ONTAP Select VM hardware version needs to be upgraded due to VMSA-2018-0004
- Ontap Select won't start after power outage
- ONTAP Select (SYNCMIRROR PLEX FAILED) Takeover initiated due to network partitioning
- ONTAP Select: Assertion failure due to nvram i/o timeout
- ONTAP Select: Call home for MULTIPLE DISKS MISSING and HA failover
- ONTAP Select: Cannot force giveback on the nodes
- ONTAP Select: Can Deploy appliance be recovered without a configuration backup?
- ONTAP Select: Cluster creation is initiated but fails to complete
- Ontap Select: Cluster refresh fails after upgrading cluster
- ONTAP Select: Cluster Refresh fails with ONTAPGetClusterIdentityFailed
- ONTAP Select: Configuration Backup fails after upgrade to 9.7
- ONTAP Select: Configuration backup file cannot be uploaded
- ONTAP Select: Deploy does not report the used space for a capacity pool
- ONTAP Select: Deploy VM clock incorrect
- ONTAP Select: Duplicate IPs are being reported after storage failover
- ONTAP Select: EMS reports scsi.path.excessiveErrors
- ONTAP Select: ESXi resource starvation causes degraded failover
- ONTAP Select: Failed to find an unassigned mediator disk on node
- ONTAP Select false-positive errors triggered - monitor.globalStatus.critical
- ONTAP Select: fatal multi-disk error
- ONTAP Select: frequent reboots due to APD
- ONTAP Select: HA Group Notification (CONTROLLER TAKEOVER COMPLETE COMMUNICATION LOSS) EMERGENCY
- ONTAP Select: HA Group Notification (PARTNER DOWN, TAKEOVER IMPOSSIBLE ) EMERGENCY due to back-end latency
- ONTAP Select: HA interconnect issues on ONTAP Select because virtual networking best practices are not followed
- ONTAP Select: How to increase the capacity of a Capacity Tier License
- ONTAP Select: How to Renew the ONTAP Select Deploy SSL certificate
- ONTAP Select: How to reset forgotten Deploy admin password ONTAP Select Deploy
- ONTAP Select: How to set root password for ONTAP Select Deploy 9.7 or earlier
- ONTAP Select: How to set root password for ONTAP Select Deploy 9.8 or later
- ONTAP Select: How to transfer capacity tier license to a new array
- ONTAP Select: Is it allowed to rename an aggregate?
- ONTAP Select: License Renewal has been updated in Deploy but not in ONTAP
- ONTAP Select: license.sfo.gb.veto.eval: SFO giveback vetoed. Evaluation period ended
- ONTAP Select: License upgrade fails when aggregates are offline or eval license expired
- ONTAP Select: Missing download button for new license
- ONTAP Select: Nodes stuck in performing a giveback
- ONTAP Select: node could not update its backup mailbox
- ONTAP Select: NODE in state of unknown and not able to power up
- ONTAP Select: Package download failed due to a timeout
- ONTAP Select: Panic "protection fault on VA 0 code 0 cs:rip 0x20:0xffffffff8a43d555"
- ONTAP Select: Refresh operation for cluster failed after migrating OTS node to new ESXi host
- ONTAP Select: Repeated SYNCMIRROR PLEX FAILED Alerts
- ONTAP Select: root aggregate 99 percent usage
- ONTAP Select: Serial number presented in System Manager is not correct
- ONTAP Select: Slow performing NAS volume, aggr 'unknown', node health 'false'
- ONTAP Select: Stale disk created during 'storage add' task prevents adding additional space to cluster
- ONTAP Select: System hangs during configuration recovery
- ONTAP Select: Unable to convert Capacity Tier license from Evaluation license
- ONTAP Select: Unable to create data aggregate, Reason: 1 disk needed, but not enough matching disks are available
- ONTAP Select: Unable to vMotion node due to "Currently connected device backing is not accessible" error
- ONTAP Select: Upgrading existing KVM installations from ONTAP 9.9.1 to ONTAP 9.14.1
- ONTAP Select: vnvram.dma.long.wait logged due to outdated SANtricity OS
- ONTAP Select: What are the supported methods for moving ONTAP Select VMs to new hosts
- ONTAP Select: What is the supported method for replacing the backing storage array for ONTAP Select
- ONTAP select: Wrong Form Validation Domain Names "Segments cannot start with a number or an underscore"
- ONTAP Select : cpeer.unavailable: Peer cluster is no longer available
- Takeover not possible: ONTAP Select: cf_diskinventory_sendFailed reason="HA Interconnect down"
- ONTAP upgrade fails with message "Failed to get cluster IP for node UNKNOWN_HOST."
- ONTAP Select fails to boot due to an error: open_emulation_file: No /dev/nvd0 file found
- Operation of the ONTAP Select trial license
- OTS: Node panics and goes into CLAM takeover
- OTS: Reclaim button in Deploy is greyed out
- OTS: Recurring RDMA down issues
- OTS: Unable to perform giveback after upgrading pool license
- OTS - Unable to create Data aggregate using Capacity Pool License
- What is the purpose of each VMDK in ONTAP Select VM?
- OTS cannot boot after ONTAP upgrade to 9.12.1
- OTS Deploy backup fails with: Can't convert 'bytes' object to str implicitly
- OTS Deploy cluster refresh fails with error: ONTAPSelectSysCLIVersionFailed zapi returned bad status 0: None
- OTS Deploy fails with NodeCreateTimedOut error
- OTS Deploy Upgrade Error 504 None - None
- OTS "node storage disk show" report wrong information
- OTS Select console showing: Notice: phf.manage.add.upcall when no storage was added
- OTS takeover message "FS_FLT:No EMS string found but an error was detected"
- OTS: After physical switch upgrade error reported: RPC: Couldn't make connection
- OTS: Can VMware Tools be upgraded for ONTAP Select's Deploy VM?
- OTS: Capacity Pool is showing only 50TB showing instead of 100TB after adding capacity license
- OTS: Cluster installation times out
- OTS: Deployment fails with vimServiceVersions.xml version unavailable
- OTS: Deploy shows duplicate node serial number for missing cluster
- OTS: Disks marked as 'broken' in Software RAID configuration
- OTS: Increasing storage
- OTS: Network connectivity Checker is failing
- OTS: Node panics after upgrading
- OTS: Node Panic from large number of mount points due to hung sysctl
- OTS: Unable to create storage after adding Deploy vCenter plug-in
- OTS: Unable to restore configuration from another Deploy instance
- OTS: VM not starting
- OTV discovery detects Veeam Backup datastore servers as Unknown “ Phantom” Storage System
- PANIC: nvram_mgr: cannot read nvramfile/disk, err=5
- PANIC: watchdog nmi on cpu 0, hang cpu is 0 in process idle: cpu0 on release 9.11.1P5
- Partner Down, Takeover Impossible due to ESXi host move
- Plus sign grayed out in ONTAP Select Deploy when trying to add storage
- Poor Performance in an ONTAP Select Instance due to vm.dev.diskSlowIO
- Procedure in case of split brain scenario for OTS
- Process vifmgr unresponsive for 183 seconds in process nodewatchdog on ONTAP
- RAID status on one ONTAP Select aggregate is mirrored degraded
- Refreshing the cluster operation fails with "ONTAP credentials are invalid"
- Refresh Cluster Operation Failed
- Regenerated Capacity Pool license has lower than expected capacity
- Rename ONTAP Deploy instance
- Resize the root aggregate in ONTAP select
- Restricted aggregate - Neither fsinfo block of aggregate is valid
- Security vulnerability identified on OnTap Select Deploy
- Select Cluster Deploy Virtual appliance create failed (waitForLease)
- Select disks were created successfully but not discovered in ONTAP
- Select ISO doesn't get relocated whilst performing vMotion
- Select licenses for increasing capacity must be for the same SN
- ONTAP Select node boot error: load /nvdimm.ko: failed - no such file or directory
- Select node creation fails with "Reason: SOAP request error"
- Select node deploy fails with NodeNotPingable error
- Select Node in an HA pair fails to fully start after KVM host OS upgrade
- Select upgrade of ONTAP 9 fails with error Package corrupted or incorrect-Version missing
- Select vm hung during boot - no login prompt
- Select: can I increase capacity in smaller increments as 1TB
- SELECT: Can VMDKs be reattached to existing or new ONTAP Select cluster(s)?
- Select: Disk failure after instance resize from small or medium to large
- Select: Is the Hardware Acceleration functionality supported by NetApp?
- SELECT: reclaiming capacity after disk detach
- Single node ONTAP Select instance panic on boot
- Single volume inaccessible following SYNCMIRROR PLEX FAILED ALERT panic
- Slow SyncMirror Resync Speed
- Can not upgrade the ONTAP Select with license error
- Space reclamation is not working for Thin Provisioned ONTAP Select
- Support for common vSphere functionalities on ONTAP Select VM's
- SYMPFA:HA Group Notification from node (SYNCMIRROR PLEX FAILED) ALERT
- SYMPFA:HA Group Notification from NODE (SYNCMIRROR PLEX FAILED) ALERT - Snapshot copy
- SYNCMIRROR PLEX FAILED during the takeover for ONTAP select node
- SYNCMIRROR PLEX FAILED health error upon ONTAP Select reboot
- System Manager shows error monitor.globalstatus.critical after both nodes reboot
- System Manager Web UI cannot be reached
- TakeoverByPartnerDisabled errors are seen upon ONTAP Select deployment
- Takeover not possible: local node missing partner disks in ONTAP Select
- The aggregate size becomes smaller when one of OST node shutdown in HA pair
- The error crypto.import.failed seen if your passphrase is incorrect
- The ONTAP Select cluster is not visible in ONTAP Select Deploy
- Unable to add more than 16TB as add-on capacity in Select Deploy
- Unable to add new ESXi server to NetApp deploy node
- Unable to add new vCenter credentials in Deploy: HostConnecttionFailed
- Unable to add SnapLock license to new ONTAP Select Installation
- The plus sign is grayed out when trying to add storage in Select Deploy
- Unable to apply license to 9.1 select : Reason: Unable to find API: license-v2-apply
- Unable to apply multiple licenses with a combined capacity to OTS
- Unable to backup as deploy backup create command is not found
- Unable to connect to cluster or node management interfaces in ONTAP Select
- Unable to copy image to cluster or node and ONTAP Select upgrade fails
- Unable to copy ONTAP Select update image to node, not enough space on root volume
- Unable to edit ONTAP Select VM settings
- Unable to expand ONTAP Select storage : Datastore is not visible
- Unable to find Deploy image within the Support Site
- Unable to giveback for ONTAP Select node in HA pair
- Unable to login to Deploy Appliance: Deploy API service is currently not available
- Unable to reach the SVM interface from new subnet
- Unable to reclaim space for removed aggregates in ONTAP Select
- Unable to select Storage Pool in ONTAP Select Deploy
- Unable to update capacity license through ONTAP Deploy due to ping error
- Unable to use snapshotReserve for automatic snapshot cleanup
- Unable to view the ESXi hosts from the ONTAP select deploy
- Upgrade of ONTAP Select Deploy with DHCP active leases alters IP and creates lengthy MAC
- User data inconsistency reported on ONTAP Select system
- User is unable to access the S3 bucket
- Validate internal network connectivity before creating the cluster
- vCenter reports 'Error downloading plug-in' in ONTAP SELECT
- Virtual disks added in vCenter is showing lower capacity when viewed in ONTAP Select
- VMware "Export OVF template" task stuck at 0%
- VMware Tools not running on ONTAP Select
- VM creation fails with "NodeCreateFailed"
- VM moved to new ESXi host and won’t boot
- k.panic: Panic String: vnvram_flush: sim_kern_nvram_write_n failed with 5 in process vnvram_flush_thread on release
- Volumes are missing after power outage of ONTAP Select node
- Volume location database (VLDB) timed out on ONTAP Select
- vSphere VM Direct Console to serial port is not working
- "Waiting until daemon ktlsd starts up" console message after ONTAP Select upgrade
- What are the implications of performing an upgrade of the Deploy Appliance?
- What are those ONTAP Select disk assignment alerts?
- What does vnvram.dma.long.wait signal in ONTAP Select?
- What impact an ESXi upgrade have on running Ontap Select VMs?
- What is the impact of importing capacity tier licenses?
- What is the proper way to shut down and power on an ONTAP Select cluster?
- What is the workflow/time delay of failover and failback process in case of OTS two node cluster?
- What's the default port for iSCSI?
- Where can I download the last OVA to install the ONTAP Select Deploy?
- Where can I find documentation about ONTAP Select API calls?
- Where to download obsolete DEPLOY Upgrade images from?
- Where to get help for vMotion issues with ONTAP Deploy/Select?
- Which image should I download to upgrade ONTAP Select?
- Why are new plexes named plex2, plex5.. Why not plex 1 or 0?
- Why do the regular ONTAP and ONTAP Select OS available downloads differ?
- Why is a space increased in the StorageGrid bucket not reflected in ONTAP cloud tier?
- Why is our aggregate filled up?
- Write latency increase after firmware upgrade on HPE server/storage running ONTAP Select