ONTAP Select failover is disabled as some aggregates are degraded or unmirrored
Applies to
- ONTAP 9
- ONTAP Select
- Storage Failover
Issue
- ONTAP Select two-node reports below error that show takeover is not possible:
Node::> storage failover show
Takeover
Node Partner Possible State Description
-------------- -------------- -------- -------------------------------------
Node-01 Node-02 false Connected to Node-02, Takeover is not possible: Aggregates are degraded or unmirrored
Node-02 Node-01 false Connected to Node-01, Takeover is not possible: Aggregates are degraded or unmirrored
2 entries were displayed.
- Command '
run node * -command sysconfig' indicates that some aggregates are not configured as mirrored aggregates:
Example: two disks are configured into one raid group(rg0) which is no mirror
Aggregate aggr02 (online, raid0) (advanced_zoned checksums)
Plex /aggr02/plex0 (online, normal, active, pool0)
RAID group /aggr02/plex0/rg0 (normal, advanced_zoned checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
data 0b.11 0b - - SA:A 0 VMDISK N/A 3612664/7398737792 3670015/7516192760
data 0b.10 0b - - SA:A 0 VMDISK N/A 3612664/7398737792 3670015/7516192760