Skip to main content
NetApp Knowledge Base

Switches

Other Resources

    • How to choose which file needs to be used while performing Brocade FOS upgradeFri, 09 Jun 2023
    • Broadcom BES-53248 switch not booting, even after power cycleWed, 07 Jun 2023
    • Does CVE-2022-38023 have any effect on Brocade productsWed, 07 Jun 2023
    • How to modify the IP address of inter cluster switch BES-53248Tue, 06 Jun 2023
    • Why SANnav FOS 2.3 is not visible on Broadcom Assist Portal?Fri, 02 Jun 2023
    • SwitchFanNotPresent and SwitchPowerNotPresent alert raised against a BES-53248 switchFri, 02 Jun 2023
    • Laser_Flt error reported on Brocade switch portWed, 24 May 2023
    • False SwitchPowerNotPresent_Alert and SwitchPowerUnknown_Alert reported by CSHMTue, 23 May 2023
    • How to install EFOS Software for BES-53248 SwitchMon, 22 May 2023
    • Cannot collect supportsave from SANNAV after a SANNAV upgradeWed, 17 May 2023
    • HA Out Of Sync issue observed on X7 Director switchWed, 17 May 2023
    • Cannot configure ISL between Brocade G620 and HPE blade SAN switch due to enhanced characters in zone and alias namesTue, 16 May 2023
    • Cannot configure ISL between Brocade G620 and HPE blade SAN switch due to zone conflict errorMon, 15 May 2023
    • Cannot configure ISL between Brocade G620 and HPE blade SAN switch due to ESC Enhanced Zone Object Name Conflict errorMon, 15 May 2023
    • Unable to apply Port on Demand (POD) LicenseThu, 11 May 2023
    • Unable to access new Brocade G610 switchThu, 11 May 2023
    • Brocade G610 switch is inaccessibleThu, 11 May 2023
    • Unable to ISL Brocade and Cisco SwitchWed, 10 May 2023
    • Brocade switch reboot due to NTPTue, 09 May 2023
    • EMS message 'vifmgr.cluscheck.droppedall' seen for all nodes in clusterFri, 05 May 2023
    • How to choose which file needs to be used while performing Brocade FOS upgradeFri, 09 Jun 2023
    • CLUSTER NETWORK DEGRADED  on BES-53248Thu, 08 Jun 2023
    • Brocade Switch Troubleshooting WorkflowThu, 08 Jun 2023
    • Chassis Warning C4-1006 and Critical C4-1010 Message reported on Brocade switchWed, 07 Jun 2023
    • Broadcom BES-53248 switch not booting, even after power cycleWed, 07 Jun 2023
    • ERR truncating integer value events observed on BES-53248 switchWed, 07 Jun 2023
    • Does CVE-2022-38023 have any effect on Brocade productsWed, 07 Jun 2023
    • Brocade Switch no longer accessible over SSH due to sshd_config formattingTue, 06 Jun 2023
    • Brocade FC port offline with No_Sync state due to faulty end device sfpTue, 06 Jun 2023
    • Brocade switch port flaps with minimal media errors being reportedTue, 06 Jun 2023
    • Brocade switch port flaps without any media errors reportedTue, 06 Jun 2023
    • TX power of SFP is lowTue, 06 Jun 2023
    • Rule- defALL_32GSWL_SFPRXP_63 triggered on brocade switchTue, 06 Jun 2023
    • PERF_IMPACT and LATENCY_CLEAR events reported on F-Ports due to slow drain deviceTue, 06 Jun 2023
    • PERF_IMPACT and LATENCY_CLEAR events reported on F-Ports due to faulty switch SFPTue, 06 Jun 2023
    • PCS error reported on Brocade switch port with Low Rx power due to faulty end device sfpTue, 06 Jun 2023
    • PCS error reported on Brocade switch port with Low Rx power due to faulty cableTue, 06 Jun 2023
    • PCS error and uncorr errors reported on Brocade E-port post changing the switch speed to 16gbpsTue, 06 Jun 2023
    • Low Rx power reported on Brocade switch port due to faulty end device sfpTue, 06 Jun 2023
    • Brocade switch port offline and in “No light” state with Rx/Tx power showing as -infTue, 06 Jun 2023

    Add code for Video content

     

    NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
    Scan to view the article on your device

     

    • Was this article helpful?