NetApp HCI
This guide provides an overview of product features and related technologies. In addition, it contains recommendations on best practices, tutorials for getting started, and troubleshooting information for common situations.
Highest rated
(rating)- How to RTFI an HCI Compute Node via BMC
- NetApp Deployment Engine(NDE) or Scale fails to discover new compute and storage nodes
- How to manually add an HCI compute node using host profiles
- Troubleshoot Invalid Gateway in NDE
- How to regenerate a VASA provider certificate in vCenter
- Which Mellanox Switches are available for the Netapp HCI?
- ESXi host PSOD due to NMI failing to ack TLB invalidate
- How to troubleshoot HCI Scale using APIPA
- HCC login to mNode FQDN fails with "Something went wrong during the login process" error
- How to add multiple compute node assets into HCC using PowerCLI
- NetApp HCI ESXi 7.0 drivers
- Element cluster event: Number of virtual volumes is approaching or has exceeded the maximum recommended limit
- Cleondris failback fails with "Could not find the network on host" error
- NetApp HCI End Of Availability (EOA)
- How to access BMC and change IP address on H610S
Recently updated
(date updated)- Recurring power supply hardware events on NetApp HCI
- Remote Replication reports remoteRepAsyncDelayExceeded and never gets past ResumingDataTransfer
- Expired Certificate Stopping Upgrade Element Software
- System logging is not configured on host
- Datastore in vCenter shows as inaccessible
- Cannot add a 2nd VASA provider to a single vCenter
- ONTAP Cluster and Node IP Address Change after ONTAP Deploy Changed IP Addr
- HCC not available after failed management services upgrade
- vSphere marks NetApp HCI compute nodes as "Incompatible," blocking upgrade to vSphere ESXi 7.x
- System Firmware Error: Unrecoverable hard-disk/ATAPI/IDE device failure
- How to update a storage admin password for monitoring services on mNode with Element software 11.3 or later
- The event tab does not work in NetApp SolidFire Active IQ
- Full datastore causing VMs to go offline in Element software
- Solidfire: Troubleshooting ESXI 6.5 host in hung state
- Intel NIC physical port remains up when vmnic interface is explicitly set to down
Recently added
(date created)- Expired Certificate Stopping Upgrade Element Software
- System logging is not configured on host
- Datastore in vCenter shows as inaccessible
- Cannot add a 2nd VASA provider to a single vCenter
- ONTAP Cluster and Node IP Address Change after ONTAP Deploy Changed IP Addr
- HCC not available after failed management services upgrade
- The event tab does not work in NetApp SolidFire Active IQ
- Full datastore causing VMs to go offline in Element software
- HCC compute node FW upgrade failed to mount ISO
- mNode Telemetry Service log shows “WARNING Mnode /about returned mnode_host_ip=unknown”
- How to view and access MVIP reports in Element Software
- Can you shrink datastore size on HCI/SolidFire?
- Solidfire cluster nodes lost cluster information after network outage
- HCC Healthcheck fails with Invalid IP address error
- HCI Compute host hangs during backup
Here are some interesting things about...