SANtricity OS KBS
SANtricity OS KBS
Featured
Collecting E-Series Support Data
How to collect support data for NetApp E-Series Storage Arrays
How to collect support data for NetApp E-Series Storage Arrays
E-Series Health Image
How to retrieve a core dump from an E-Series storage system
How to retrieve a core dump from an E-Series storage system
Performance
How to troubleshoot performance step by step
How to troubleshoot performance step by step
Host Multipath Driver Configuration Error
Troubleshooting E-Series Host multipath driver configuration error alert
Troubleshooting E-Series Host multipath driver configuration error alert
Volume Not on Preffered Path
How to troubleshoot Volume not on preffered path
How to troubleshoot Volume not on preffered path
Host Redunancy Lost
How to troubleshoot Host Redundancy Lost Alerts
How to troubleshoot Host Redundancy Lost Alerts
Other Resources
- Data access delay during controller failover on E-SeriesDec, 2025
- SANtricity System Manager email test configuration failsDec, 2025
- Is it necessary to clear the copy pair in order to re-run volume copy with the same combination?Dec, 2025
- Does setting TargetReadOnlyEnabled=FALSE make the target volume writable without pair deletion?Dec, 2025
- E-Series unable to Delete Volume Group: Volume group is in exported stateDec, 2025
- E-Series SANtricity OS upgrade pre-check fails due to event log verification failureDec, 2025
- E-Series controller reboots unexpectedly due to Master Transaction Timer ExpiredDec, 2025
- BeeGFS client access lost during Compute node HCA firmware upgradeDec, 2025
- How to upgrade E-Series SANtricity OS on storage controllers in StorageGRID appliancesDec, 2025
- SANtricity System Manager Web Interface Not Responding on one controllerDec, 2025
- E-Series E5700 controllers reboot unexpectedly after 199 days of uptimeDec, 2025
- Drive Temperature Values Display as “0” in SANtricity OS 11.70.3 and Later via REST APIDec, 2025
- Certificate error reported when attempting to upgrade drive firmware on E-seriesDec, 2025
- E-Series installation NVMe LUN not visibleDec, 2025
- Volume Path Errors Triggered by Link FlapsDec, 2025
- E-Series Host Redundancy Lost alert due to incorrect cabling with FC hostDec, 2025
- E-Series No rebuild(reconstruction) or Rebalance Operation occurs after disk replacementNov, 2025
- E-Series "Isolation of drive causing redundancy mismatch" - AutoSupport MessageNov, 2025
- Replacement E-Series E2800 controller goes into reboot loop and locks down with OE LU statusNov, 2025
- If an unexpected controller reboot occurs with degraded RAID 6 or disk pool volumes then dual controller lockdown might occurNov, 2025