Skip to main content
NetApp Knowledge Base

How to migrate to Advanced Disk Partitioning (ADP)?

Views:
8,782
Visibility:
Public
Votes:
4
Category:
disk-drives
Specialty:
hw
Last Updated:

Applies to

  • All FAS systems
  • All AFF systems

Description

As ONTAP continues to push the limits of storage efficiency in every release, there are customers who stand to benefit from these innovations. For example, some systems might have their root aggregate on whole drives and customers may want to move to root-data (ADPv1) or root-data-data (ADPv2) partitioning to gain additional storage efficiencies, such as reduced parity and spare disk overhead.

Also, some customers may want to move from ADPv1 on HDDs to ADPv2 on SSDs to reap the benefits of Flash and further improvements in parity and spare disk overhead. Keeping that in mind, this article is written to cover the steps required to migrate the root aggregate from whole drives to ADPv1 (or ADPv2), as well as the steps to migrate the root aggregate from ADPv1 to ADPv2. Note that ADPv2 is supported only on SSDs.

This procedure is nondisruptive – customers can continue to run their applications while the root aggregate is migrated.  This procedure assumes an existing HA pair with data.  For creating a new HA pair refer to How to repurpose an HA Pair with ONTAP 9 or How to use a partial set of installed disks for Advanced Disk Partitioning (ADP) and What are the rules for Advanced Disk Partitioning?

Prerequisite
To move to ADPv1/ADPv2, the following are prerequisites for a successful migration:
  • The nodes must be part of an HA-configured system (HA pair).
  • You must be running an ONTAP version with the fix for BUG 935935 – Feature Request: The "system node migrate-root" command needs to support partitioned disks
  • There must be at least eight drives of the drive type that one needs to move the root aggregate to. The recommended number of drives per node are 12 or more.
  • There must be an even number of destination drives, so that those can be distributed equally between the two nodes of the HA pair.
  • The destination drives must be spare disks and not already partitioned.
  • The destination drives must be large enough to accommodate root aggregate slices on its thin partitions and still leave significant space for one or two data partitions
  • The FAS or AFF system currently hosting the root aggregate must support ADP
    • Entry-level FAS platforms support ADPv1 on HDDs
    • Mid-range FAS platforms support ADPv1 on HDDs only via bootarg
    • All AFF platforms support only ADPv2 on SSDs
    • FAS2750, FAS8200, FAS8300/8700, FAS9000, and FAS9500 supported ADPv2 on SSDs only
  • Both the nodes in the HA-pair must be in a healthy state with no RAID groups performing reconstruction, sick disk copy, or re-parity operations
  • The root aggregate must not be mirrored on either node

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.