NetApp HCI Operating System
NetApp HCI Operating System
Other Resources
Here is some sample text for the Resolution Guides tab.
Highest rated
(rating)- How to RTFI a NetApp H410S Node via BMC
- NetApp HCI ESXi 7.0 drivers
- ESXi host in hung state
- Datastore creation via VCP Element Software Plugin fails with "No available disks to create a datastore on"
- How to create an unmanaged snapmirror endpoint relationship between Element and ONTAP
- FRU Replacements for the Mellanox SN2700 Switch
- NetApp Deployment Engine(NDE) or Scale fails to discover new compute and storage nodes
- AIQ shows duplicate compute nodes
- System logging is not configured on host
- CVE-2021-3156 - Is NetApp SolidFire and HCI Management Node vulnerable?
- How to manually add an HCI compute node using host profiles
- How to reset BMC on NetApp HCI compute nodes
- lacpApiVersion alert while upgrading vCenter
- ESXi host PSOD due to NMI failing to ack TLB invalidate
- NetApp HCI - Where to download Windows Drivers for H300/H500/H700 ?
Recently updated
(date updated)- HCI: How to check available storage and expand a datastore in vSphere
- How to setup the BMC and change the IP address on SolidFire Nodes
- Datastore creation via VCP Element Software Plugin fails with "No available disks to create a datastore on"
- Last gcCompleted Event Was Over 12 Hours Ago due to cluster Stopped Reporting to ActiveIQ
- Mellanox switch no longer boots up after Onyx firmware upgrade
- AIQ shows duplicate compute nodes
- Which serial/console cable can be used for HCI/SF products?
- Block Cluster Full Error
- Last gcCompleted event was over 12 hours ago: Investigation Required
- High Utilization on multiple volumes via OpenStack
- Unable to load BMC Web UI with 500 - Internal Server Error
- Voltage lower critical - going low alert on H610S and H615C nodes
- Persistent 'FanXA RPM is failed or missing'
- ESXi host and VM's down due to unresponsive host
- Which discovery protocol does NetApp HCI recommend for vDS and vSS, CDP or LLDP?
Recently added
(date created)- HCI: How to check available storage and expand a datastore in vSphere
- Last gcCompleted Event Was Over 12 Hours Ago due to cluster Stopped Reporting to ActiveIQ
- Which discovery protocol does NetApp HCI recommend for vDS and vSS, CDP or LLDP?
- is it possible to change the MVIP IP?
- How to change ring buffer size of vmnics on HCI compute nodes
- ESXi Reporting "Performance Has Deteriorated" Messages for Multiple SolidFire Volumes
- Compute firmware upgrade causes node boot issues and IPMI login failure
- HCI intermittent communication loss between ESXi and vCenter
- vMotion failed because ESX hosts were not able to connect over the vMotion network
- Disruption during EOS upgrade on 2 nodes cluster
- vCenter information in SolidFire AIQ has not been updated due to NOT_RESPONDING hosts
- How to apply NIC Driver 4.21.71.101 to H410C
- HCI - vsphere HA detected that this host is network isolated from the cluster
- ActiveIQ reports cluster as healthy but Element API shows disk failed or node offline error
- Bare Metal Windows Server Fails to Boot