Gracefully shutdown and power up your storage system Resolution Guide
Applies to
- ONTAP 9
- AFF Systems
- FAS Systems
- ASA Systems
- MetroCluster FC
- MetroCluster IP
- Data ONTAP 8.2 7-Mode
- E-Series
- NetApp HCI
- StorageGRID
Description
Follow this guide to help you locate the proper solution to your question or problem.
Before you start
- Ensure backups are completed
- Ensure SnapMirror updates are completed
- To prevent automatic support case generation, send an Autosupport message to indicate maintenance is underway
Procedure
ONTAP 9 |
All Nodes in a Cluster |
How to perform graceful shutdown of all ONTAP nodes in a cluster How to power up all ONTAP nodes in a cluster following a graceful shutdown |
High Availability (HA) pair in a 4+ node cluster | How to perform a graceful shutdown and power up of one HA pair in a 4+ node cluster | |
A single Node in a two-node cluster | How to halt a single node without takeover in a two-node ONTAP cluster | |
Single node Cluster | How to gracefully shutdown a single node ONTAP cluster | |
Shutdown using System Manager | How to shutdown/boot one node on OCSM | |
Cloud Volumes ONTAP (CVO) OnCommand Cloud Manager (OCCM) |
How to shutdown/boot one node on OCCM | |
ONTAP Select | What is the proper way to shut down an ONTAP Select node? | |
MetroCluster FC | Powering off an entire MetroCluster FC configuration | |
MetroCluster IP | Powering off an entire MetroCluster IP configuration |
Data ONTAP 8.2 (7-mode) |
High Availability (HA) pair | How to perform a graceful shutdown and power up of Data ONTAP 8.2 (7-mode) storage system |
E-Series |
How to power off an E-Series storage system |
NetApp HCI system |
How to power off and power on a NetApp HCI system |
StorageGRID |