CFLOADER-287: In FAS2820 diag test, the Fan Test item is displayed only on NodeA

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 20

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

Issue

・In the diag test (Test System), only the MB inserted on the SLOT-A side of the chassis displays the Fan Test item.
・The MB inserted on the SLOT-B side of the chassis does not display the Fan Test item.
SLOT-A snip:
====================================================================================
[2023-12-04 10:48:27.682] PCH I2C Test Stop: 2023-12-04 01:48:34
[2023-12-04 10:48:27.682]
[2023-12-04 10:48:27.682] ------------------------------------------------
[2023-12-04 10:48:27.686]
[2023-12-04 10:48:27.686] Elapsed Time: 0:00:00.006631
[2023-12-04 10:48:27.687]
[2023-12-04 10:48:27.687] ------------------------------------------------
[2023-12-04 10:48:27.733]
[2023-12-04 10:48:27.733] PASSED
[2023-12-04 10:48:27.820] Set FAN 1 to 5200 RPM
[2023-12-04 10:48:27.828] Check RPM in the range from 4680.0 to 5720.0 RPM
[2023-12-04 10:48:33.277] FAN0 expect in range from 4680.0 to 5720.0 RPM, current 5248 RPM, result: PASS
[2023-12-04 10:48:33.293] FAN1 expect in range from 4680.0 to 5720.0 RPM, current 5152 RPM, result: PASS
[2023-12-04 10:48:33.293]
[2023-12-04 10:48:33.528] Set FAN 3 to 5200 RPM
[2023-12-04 10:48:33.537] Check RPM in the range from 4680.0 to 5720.0 RPM
[2023-12-04 10:48:39.022] FAN2 expect in range from 4680.0 to 5720.0 RPM, current 5312 RPM, result: PASS
[2023-12-04 10:48:39.033] FAN3 expect in range from 4680.0 to 5720.0 RPM, current 5280 RPM, result: PASS
[2023-12-04 10:48:39.076]
[2023-12-04 10:48:39.321] Reload the default fan table
[2023-12-04 10:48:39.321]
[2023-12-04 10:48:39.321] M.2 SATA Drive Test Start: 2023-12-04 01:48:46
[2023-12-04 10:48:39.340]
[2023-12-04 10:48:39.340] [DEV1] M.2 SATA Drive Read Test:
====================================================================================
SLOT-B snip:
====================================================================================
[2023-12-04 10:48:27.970] PCH I2C Test Stop: 2023-12-04 01:48:33
[2023-12-04 10:48:27.977]
[2023-12-04 10:48:27.977] ------------------------------------------------
[2023-12-04 10:48:27.978]
[2023-12-04 10:48:27.978] Elapsed Time: 0:00:00.002281
[2023-12-04 10:48:27.982]
[2023-12-04 10:48:27.982] ------------------------------------------------
[2023-12-04 10:48:27.988]
[2023-12-04 10:48:27.988] PASSED
[2023-12-04 10:48:27.988] ============================================================
[2023-12-04 10:48:27.988] PCH-I2C Test:
[2023-12-04 10:48:27.997] ============================================================
[2023-12-04 10:48:27.998]
[2023-12-04 10:48:27.998]
[2023-12-04 10:48:27.998] PCH I2C Test Start: 2023-12-04 01:48:33
[2023-12-04 10:48:28.000]
[2023-12-04 10:48:28.000] [clk0] Read Test:
[2023-12-04 10:48:28.000]
[2023-12-04 10:48:28.000]
[2023-12-04 10:48:28.000] PCH I2C Test Stop: 2023-12-04 01:48:33
[2023-12-04 10:48:28.012]
[2023-12-04 10:48:28.012] ------------------------------------------------
[2023-12-04 10:48:28.014]
[2023-12-04 10:48:28.014] Elapsed Time: 0:00:00.006674
[2023-12-04 10:48:28.014]
[2023-12-04 10:48:28.015] ------------------------------------------------
[2023-12-04 10:48:28.015]
[2023-12-04 10:48:28.015] PASSED
[2023-12-04 10:48:28.020]
[2023-12-04 10:48:28.020] M.2 SATA Drive Test Start: 2023-12-04 01:48:33
[2023-12-04 10:48:28.021]
[2023-12-04 10:48:28.021] [DEV1] M.2 SATA Drive Read Test:
====================================================================================
・Swapped the MBs between SLOT-A and SLOT-B (Inserted the MB from SLOT-A into SLOT-B and inserted the MB from SLOT-B into SLOT-A).
・Stopped the LOADER on the MB on the SLOT-A side and switched to diag menu (2) Test System) only on the MB on the SLOT-B side.