• Network ports fail to come online after ONTAP upgradeTue, 04 Nov 2025
• TRUFOS licens install failedFri, 31 Oct 2025
• How to configure RADIUS AAA authentication on inter-cluster NX-OS 3132QV switchesFri, 31 Oct 2025
• How to Enable Secure Syslog (TLS) on Brocade SAN SwitchesThu, 30 Oct 2025
• Brocade G610 Switch Ports Fail to Link at 32GbTue, 28 Oct 2025
• Brocade Unable to do Logical Switch Management operations – “system is not ready”Tue, 28 Oct 2025
• Brocade G10 switch wont power on after firmware upgradeMon, 27 Oct 2025
• Broadcom SANnav unable to find jump code to upgradeMon, 27 Oct 2025
• Paths to one storage array missing through one fabricMon, 27 Oct 2025
• "ClusterSwitchConnectionDegraded_Alert" caused by faulty port on the switchMon, 27 Oct 2025
• SSH Terrapin (CVE-2023-48795) Vulnerability on Cisco 9336C-FX2 SwitchesWed, 22 Oct 2025
• Brocade FC switch boots with Failed parse system configFri, 17 Oct 2025
• Brocade X7-8 core blade shows faulty due to bad control processor bladeThu, 16 Oct 2025
• Cannot find Brocade SANnav download location on Broadcom support portalTue, 14 Oct 2025
• Where is the end device compatibility matrix for Brocade FC switches?Mon, 13 Oct 2025
• CP status changed to 0 alert seen in SANnav event logsMon, 06 Oct 2025
• Brocade password change fails due to no space left on deviceFri, 03 Oct 2025
• HA state went out of sync due to mdd process restart on Brocade switchFri, 03 Oct 2025
• Continued packet loss when pinging from Cluster LIFs after EFOS upgradeFri, 03 Oct 2025
• Upgrading the NXOS on the Cluster Switch Pre-upgrade check failed. Return code -1Fri, 03 Oct 2025

• Brocade SANnav Zoning Tab shows No data to displayThu, 06 Nov 2025
• AFF-A90/FAS90 HA IC down when added to an existing clusterWed, 05 Nov 2025
• Brocade switch port offline and in “No_Sync” state due to faulty switch SFPWed, 05 Nov 2025
• Brocade switch shows Power Supply is faultyWed, 05 Nov 2025
• Network ports fail to come online after ONTAP upgradeTue, 04 Nov 2025
• Cannot find Brocade SANnav download location on Broadcom support portalMon, 03 Nov 2025
• HA state went out of sync due to mdd process restart on Brocade switchMon, 03 Nov 2025
• SwitchIslIfDownWarn_Alert after ONTAP upgradeMon, 03 Nov 2025
• TRUFOS licens install failedFri, 31 Oct 2025
• How to configure RADIUS AAA authentication on inter-cluster NX-OS 3132QV switchesFri, 31 Oct 2025
• How to Enable Secure Syslog (TLS) on Brocade SAN SwitchesThu, 30 Oct 2025
• How to upgrade or downgrade Brocade switch Fabric OS firmwareWed, 29 Oct 2025
• What is the basis on which Brocade switch models are determined?Wed, 29 Oct 2025
• Nexus switch not responding during firmware upgradeTue, 28 Oct 2025
• Cluster is showing alert for connected cluster switches, "SwitchInfoUpdateFailure_Alert"Tue, 28 Oct 2025
• Brocade G610 Switch Ports Fail to Link at 32GbTue, 28 Oct 2025
• Brocade Unable to do Logical Switch Management operations – “system is not ready”Tue, 28 Oct 2025
• Brocade G10 switch wont power on after firmware upgradeMon, 27 Oct 2025
• Broadcom SANnav unable to find jump code to upgradeMon, 27 Oct 2025
• Paths to one storage array missing through one fabricMon, 27 Oct 2025

Add code for Video content