Skip to main content
NetApp Knowledge Base

SP HBT STOPPED - AutoSupport Message

Views:
849
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • AFF / FAS
  • callhome.sp.hbt.stopped:alert
  • Call home for SP HBT STOPPED

Event Summary

This event is generated when ONTAP does not receive Service Processor (SP) heartbeat notifications. The Service Processor and ONTAP exchange heartbeat messages so that they can detect when one or the other is unavailable. This event is generated when ONTAP has not received an expected heartbeat message from the Service Processor.

As the final stage of recovery for this issue ONTAP will perform a reboot of the node, resulting in a HA Takeover from the partner system.

Validate

Event Log

event log show -severity * -message-name *sp.hbt*
 

[node-01: spmgrd: callhome.sp.hbt.missed:notice]: Call home for SP HBT MISSED
[node-01: spmgrd: callhome.sp.hbt.stopped:alert]: Call home for SP HBT STOPPED

 

event log show -severity * -message-name *shutdown*

[node-01: env_mgr: monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (System reboot to recover the BMC)

Resolution

  1. Check and upgrade SP/BMC firmware to the latest version
  2. If a takeover has already occurred see Cluster takeover complete for recovery steps
  3. See the SP HBT STOPPED resolution guide for platfom specific solutions

Additional Information

Add your text here.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • Was this article helpful?