Skip to main content
NetApp Knowledge Base

Disk shelf DS2246 is reporting UNDER-TEMPERATURE (UT) warning alerts

Last Updated:

Applies to

  • DS2246


  • Disk shelf DS2246 reports UT WARNING alerts and after a while the warning gets auto corrected.

[FAS-01: statd: monitor.shelf.warning:warning]: Fault reported on disk storage shelf attached to channel 0a. Check fans, power supplies, disks, and temperature sensors.
[FAS-01: monitor.shelf.fault.ok:info]: Fault previously reported on disk storage shelf attached to channel 0a has been corrected.
[FAS-01: monitor: monitor.globalStatus.ok:info]: The system's global status is normal.

Temperature Sensors:
Element Status         Status Bytes  Status Descriptions
  1: NONCRITICAL       03,00,18,01   UT WARNING
  2: OK                01,00,24,00   
  3: OK                01,00,2A,00   
  4: OK                01,00,3D,00   
  5: OK                01,00,28,00   
  6: OK                01,00,3D,00   
  7: OK                01,00,2B,00   
  8: OK                01,00,2A,00 

  • Though the temperature in the Data Center is normal, the warning is generated daily and goes back to normal state after some time.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device