Skip to main content
NetApp Knowledge Base

Convert Ethernet port between 40GbE and 4x10GbE personality

  1. Last updated
  2. Save as PDF
Views:
3,625
Visibility:
Public
Votes:
3
Category:
aff-series
Specialty:
HW
Last Updated:

​ ​

Applies to

  • X1144A 2-port 40GbE/4x10GbE NIC
  • X91440A 2-port 40GbE/4x10GbE module
  • Onboard Ethernet ports on AFF A700s controller motherboard
  • AFF-A900, AFF-A700, AFF-A700s, FAS9500, FAS9000
  • ONTAP 9.1 and above

Issue

X1144A, X91440A or AFF A700s onboard Ethernet ports report as "down" during new installation or after a motherboard replacement.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.