Skip to main content
NetApp Knowledge Base

Why is MPIO Setting in Windows with iSCSI, path verify enabled (PVE) set to 0

  1. Last updated
  2. Save as PDF
Views:
1,892
Visibility:
Public
Votes:
1
Category:
data-ontap-dsm-for-windows-mpio
Specialty:
san
Last Updated:

Applies to

  • NetApp ONTAP 9
  • Microsoft Windows® Server 2016

Answer

  • This is a registry value set and is just one option you can set at the host OS layer effectively probing the target on all paths every 30 seconds.  0 disables this feature and 1 enables it. 
  • Set  to 0 by Windows Unified Host Utilities 7.1 and  set to 1 in version 7.2 ( Please check latest documentation for any change in this . )
    1. HKLM\SYSTEM\CurrentControlSet\Services\mpio\Parameters\PathVerifyEnabled

Please consult these technical support resources before making any changes to these parameters as any unsupported configuration by all vendors can cause loss of data access.

  1. The host operating system.
  2. Host bus adapter ( HBA ) vendor and MPIO driver documentation for your initiator.
  3. Storage platform best practice documentation.

Additional Information

Resources to check MPIO
  1. Multipath verification for Windows hosts.
  2. Interoperability Matrix Tool.
  3. Windows Unified Host Utilities 7.1.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.