This is a registry value set and is just one option you can set at the host OS layer effectively probing the target on all paths every 30 seconds. Set to 0 by Windows Unified Host Utilities 7.1 and se...This is a registry value set and is just one option you can set at the host OS layer effectively probing the target on all paths every 30 seconds. Set to 0 by Windows Unified Host Utilities 7.1 and set to 1 in version 7.2 ( Please check latest documentation for any change in this . ) Please consult these technical support resources before making any changes to these parameters as any unsupported configuration by all vendors can cause loss of data access.
Applies to NetApp E-Series Windows Server 2016 Qlogic QLE2562 Issue Customer upgraded the Qlogic QLE2562 HBA firmware from to 8.02.00 to 08.08.01 using the Dell Qlogic Firmware DUP’s voor Qlogic 25XX ...Applies to NetApp E-Series Windows Server 2016 Qlogic QLE2562 Issue Customer upgraded the Qlogic QLE2562 HBA firmware from to 8.02.00 to 08.08.01 using the Dell Qlogic Firmware DUP’s voor Qlogic 25XX Fibre Channel serie adapters version 09.01.02, A00-00 After the upgrade the redundant paths to the E-Series E2760 CFW: 08.30.50.01 was lost
