Applies to Red Hat Update 3 and later Description This article describes on how to check device mapper multipathing and iSCSI initiators on Red Hat update 2 and later.
Applies to Note - OnTap DSM has reached End of Version Support as of Dec 2019 and is no longer supported by NetApp. NetApp recommends using native DSM/MPIO. See CPC-00184 for more information. Microso...Applies to Note - OnTap DSM has reached End of Version Support as of Dec 2019 and is no longer supported by NetApp. NetApp recommends using native DSM/MPIO. See CPC-00184 for more information. Microsoft Hyper-V ONTAP DSM for Windows Issue Hyper-V cluster nodes see BSODs at random Minidump analysis shows the error is caused within ONTAP DSM
Applies to NetApp AFF-A200 Brocade Fibre Channel (FC) switches Windows and VMware ESXi hosts Issue When a host connected to NetApp storage via Brocade FC switches reboots, other hosts may lose connect...Applies to NetApp AFF-A200 Brocade Fibre Channel (FC) switches Windows and VMware ESXi hosts Issue When a host connected to NetApp storage via Brocade FC switches reboots, other hosts may lose connection to their NetApp FC LUNs
Applies to Solaris 10/11 Description Package iscsiadm manages iSCSI software initiator on the host. When using the dynamic device discovery method, specifying the correct session count ensures that se...Applies to Solaris 10/11 Description Package iscsiadm manages iSCSI software initiator on the host. When using the dynamic device discovery method, specifying the correct session count ensures that sessions are created on individual TPGT (Target Portal Group Tag). Dynamic discovery allows specifying a single target device address (IQN or IP). Query via SendTargets for visible target devices or target portal group tags.
Applies to AFF-A700 ONTAP 9.6 LUNs connected via Fibre Channel (FC) Windows hosts Issue After a change in the fabric (e.g. disconnecting a device), hosts unexpectedly disconnect from their LUNs Hosts ...Applies to AFF-A700 ONTAP 9.6 LUNs connected via Fibre Channel (FC) Windows hosts Issue After a change in the fabric (e.g. disconnecting a device), hosts unexpectedly disconnect from their LUNs Hosts do not reconnect automatically, and have to be rebooted
Applies to VMware ESXi Issue New LUN not visible to ESXi host LUN is mapped to appropriate initiators Rescan of storage completed successfully Other LUNs visible and working with no issues
Applies to ONTAP VMware vSphere Issue When you attempt to create a NFS datastore, the operation fails with the error The mount request was denied by the NFS server. Example:
Applies to Linux Linux iSCSI (Open-ISCSI) Description WARNING This procedure does not apply to NetApp E-Series. For NetApp E-Series specific steps, please visit the How to Configure iSCSI CHAP secrets...Applies to Linux Linux iSCSI (Open-ISCSI) Description WARNING This procedure does not apply to NetApp E-Series. For NetApp E-Series specific steps, please visit the How to Configure iSCSI CHAP secrets with E-Series on a Linux Host article. This article describes the steps to configure Linux iSCSI (Open-ISCSI) with CHAP authentication.
Applies to Windows Server 2008 SP2 Windows Server 2008 R2 SP1 Windows Server 2012 R2 Windows Server 2012 Windows Server 2016 Data ONTAP DSM is now end of version support since December 31, 2019. Descr...Applies to Windows Server 2008 SP2 Windows Server 2008 R2 SP1 Windows Server 2012 R2 Windows Server 2012 Windows Server 2016 Data ONTAP DSM is now end of version support since December 31, 2019. Description This procedure includes un-installation of Data ONTAP DSM and installation of WUHU 7.1(Windows Unified Host Utilities) to make the system ready for Microsoft native MSDSM for Windows MPIO to work with NetApp storage.
