Applies to Note - OnTap DSM has reached End of Version Support as of Dec 2019 and is no longer supported by NetApp. NetApp recommends using native DSM/MPIO. See CPC-00184 for more information. Microso...Applies to Note - OnTap DSM has reached End of Version Support as of Dec 2019 and is no longer supported by NetApp. NetApp recommends using native DSM/MPIO. See CPC-00184 for more information. Microsoft Hyper-V ONTAP DSM for Windows Issue Hyper-V cluster nodes see BSODs at random Minidump analysis shows the error is caused within ONTAP DSM
Applies to ONTAP 9.x Microsoft Windows Server Issue After performing offline MetroCluster node decommission, iSCSI hosts have only one active path to LUN Multipath is not establishing via SnapDrive
This is a registry value set and is just one option you can set at the host OS layer effectively probing the target on all paths every 30 seconds. Set to 0 by Windows Unified Host Utilities 7.1 and se...This is a registry value set and is just one option you can set at the host OS layer effectively probing the target on all paths every 30 seconds. Set to 0 by Windows Unified Host Utilities 7.1 and set to 1 in version 7.2 ( Please check latest documentation for any change in this . ) Please consult these technical support resources before making any changes to these parameters as any unsupported configuration by all vendors can cause loss of data access.
Applies to ONTAP DSM 4.1 ONTAP 9.X Windows 2016 Issue ONTAP DSM no longer reporting correct pathing ID when looking at MPIO tab for disk and may show single digit number Path state will show unavailab...Applies to ONTAP DSM 4.1 ONTAP 9.X Windows 2016 Issue ONTAP DSM no longer reporting correct pathing ID when looking at MPIO tab for disk and may show single digit number Path state will show unavailable
