Skip to main content
NetApp Knowledge Base

FAS9000 Emergency shutdown after IO card changed from 40Gb NIC to 32Gb FC HBA

  1. Last updated
  2. Save as PDF
Views:
137
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS9000
  • AFF-A700

Issue

  • Power off node, replace the 40Gb NIC in slot 1 with a 32Gb FC HBA. After power on, ONTAP prompts chassis temperature is too high then emergency shutdown the node.

Dec 29 11:53:00 [node-02:monitor.globalStatus.critical:EMERGENCY]: Chassis temperature is too high..
Dec 29 11:55:19 [node-02:monitor.shutdown.chassisOverTemp:EMERGENCY]: Chassis temperature is too hot: Temp on I/O Slot1 is critical high. System will be shutdown in 2 minutes
Dec 29 11:57:19 [node-02:monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (Temperature critical)
Terminated
.
Uptime: 16m57s
System powering down...

  • Power on node again, the error disappeared.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.