A raid group in aggregate is degraded but not offline
Applies to
- ONTAP 9.1 and later
Issue
A raid group of the aggregate is online but degraded. To identify run the command sysconfig -r on each node within the MetroCluster.
node run -node * -command sysconfig -r
Aggregate aggr0 (online, raid4, degraded, mirrored) (block checksums)
Plex /aggr0/plex0 (online, normal, active, pool0)
RAID group /aggr0/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
parity switch1:8.217L2 1a 10 1 FC:A 0 SSD N/A 915465/1874872832 915715/1875385008
data switch3:8.217L3 1a 10 2 FC:A 0 SSD N/A 915465/1874872832 915715/1875385008
Plex /aggr0/plex1 (online, normal, active, pool1)
RAID group /aggr0/plex1/rg0 (degraded, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
parity switch2:8.217L2 1c 20 7 FC:B 1 SSD N/A 915465/1874872832 915715/1875385008
data switch4:8.217L3 1a 20 6 FC:A 1 SSD N/A 915465/1874872832 915715/1875385008 (offline)
In the above example aggr0 has a degraded plex1.
Event log will show messages like below at the time of the issue starting
::> event log show
Wed Oct 23 21:13:48 CEST [node-01: bg_disk_fw_update_admin: bdfu.selected:info]: Disk switch1:164.217L7 [NETAPP X371_S1643960ATE NA52] S/N [S3SENY0K214701] selected for background disk firmware update.