Skip to main content
NetApp Knowledge Base

vifmgr.lifdown.noports alert generated after takeover of two nodes

Views:
614
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9

Issue

  • vifmgr.lifdown.noports:alert was generated after a takeover was performed on two nodes in the cluster causing data LIFs to go unavailable.
  • The first data lif was successfully moved over to the failover target after a takeover of the home node was performed:
[node_21: vifmgr: vifmgr.lifmoved.nodedown:notice]: LIF datalif_036 (on virtual server 57), IP address 10.255.20.105, is being moved to node node_07, port a3a-682.
[node_21: vifmgr: vifmgr.lifBeingRemoved:notice]: LIF datalif_036 (on virtual server 57), IP address 10.255.20.105, is being removed from node node_21, port a3a-682.
[node_07: vifmgr: vifmgr.lifsuccessfullymoved:notice]: LIF datalif_036 (on virtual server 57), IP address 10.255.20.105, is now hosted on node node_07, port a3a-682.
  • Straight after that, the failover target node was also shutdown due to a takeover of the node:
[node_07: vi_if_proc_rnic: cf.fsm.nfo.shtdwnRecvIC:debug]: A node received a shutdown request over interconnect.
[node_07: cf_main: cf.fsm.nfo.startingGracefulShutdown:notice]: Negotiated failover: starting graceful shutdown.
  • Following that, all attempts to move the LIFs fail due to the home node and the failover target node being offline:
[node_02: vifmgr: vifmgr.lifdown.noports:alert]: LIF datalif_1039 (on virtual server 19), IP address 1.12.20.27, currently cannot be hosted on node node_07, port a1a-120, or any of its failover targets, and is being marked as down.
[node_02: vifmgr: vifmgr.lifdown.noports:alert]: LIF datalif_001 (on virtual server 19), IP address 1.12.21.190, currently cannot be hosted on node node_07, port a1a-120, or any of its failover targets, and is being marked as down.
[node_02: vifmgr: vifmgr.lifdown.noports:alert]: LIF datalif_007 (on virtual server 19), IP address 1.12.20.41, currently cannot be hosted on node node_07, port a1a-120, or any of its failover targets, and is being marked as down.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.