- AFF A250
- HIC_Temp0, HIC_Temp1
- Depending on the HIC type, the temp sensors on the card could be 0, 1 or 2.
- If the sensor is not present on the card, the policy set the sensor in disabled state. It is expected behavior.
- In node
run -node * -command environment statuswe can see
HIC1 Temp1 disabled -- C 3 C 5 C 101 C 103 C
sp-latest-ipmioutput, the sensor will show like:
HIC1_TEMP1 | na | degrees C | na | 1.000 | 3.000 | 5.000 | 101.000 | 103.000 | 105.000
- It can also be checked as disabled in AutoSupport section PLATFORM-SENSORS.xml