AFF A700s not reporting all the information in the "storage shelf show" output

Applies to

AFF A700s

Issue

The output of the command "storage shelf show" is not showing all the information in the subsections, as other platforms do.

Example:

::> storage shelf show -power

Shelf Name: 1.0
Stack ID: 1
Shelf ID: 0
Shelf UID: XX:XX:XX:XX:XX:XX:XX:XX
Serial Number: SHFHX0000000000
Module Type: IOM12F
Model: FS424-12
Shelf Vendor: NETAPP
Disk Count: 24
Connection Type: SAS
Shelf State: Online
Status: Normal
 
Power Supply Units:
Crest Power Reset PSU Operational
ID Type Part# Serial# Power Rating Factor Drawn Capable Enabled Firmware Status
--- ---- ------------ --------------- -------------- ------ ------- ------- ------- -------- ---------------------
- - - - - - - - - - - <== no power supplies listed

Voltage Sensors:
Voltage Operational
ID (V) Status
--- ------- ----------------------
-   -       -

Current Sensors:
Current Operational
ID (mA) Status
--- ------- ----------------------
- - -

Errors:
------
-