AFF A250 Depending on the HIC type, the temp sensors on the card could be 0, 1 or 2. If the sensor is not present on the card, the policy set the sensor in disabled state. In node run -node * -command...AFF A250 Depending on the HIC type, the temp sensors on the card could be 0, 1 or 2. If the sensor is not present on the card, the policy set the sensor in disabled state. In node run -node * -command environment status we can see HIC1 Temp1 disabled -- C 3 C 5 C 101 C 103 C In sp-latest-ipmi output, the sensor will show like: HIC1_TEMP1 | na | degrees C | na | 1.000 | 3.000 | 5.000 | 101.000 | 103.000 | 105.000 It can also be checked as disabled in AutoSupport section PLATFORM-SENSORS.xml
