Skip to main content
NetApp Knowledge Base

One port in a 40GbE card using 4x 10GbE breakout QSFPs is down

  1. Last updated
  2. Save as PDF
Views:
1,101
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
nas
Last Updated:

Applies to

X1144A 10/40 Gigabit Ethernet PCIe card XL710 QSFP+

Issue

  • Just one of the four ports connected to the card is down. Example:

    slot 1: 10/40 Gigabit Ethernet Controller XL710 QSFP+
        e1a MAC Address:    3c:fd:fe:bc:d5:c0 (auto-10g_sr-fd-up)
            QSFP Vendor:         FINISAR CORP    
            QSFP Part Number:    332-00389       
            QSFP Serial Number:  XZL0M65         
        e1b MAC Address:    3c:fd:fe:bc:d5:c1 (auto-10g_sr-fd-up)
            QSFP Vendor:         FINISAR CORP    
            QSFP Part Number:    332-00389       
            QSFP Serial Number:  XZL0M65         
        e1c MAC Address:    3c:fd:fe:bc:d5:c2 (auto-10g_sr-fd-up)
            QSFP Vendor:         FINISAR CORP    
            QSFP Part Number:    332-00389       
            QSFP Serial Number:  XZL0M65         
        e1d MAC Address:    3c:fd:fe:bc:d5:c3 (auto-unknown-fd-down)
            QSFP Vendor:         FINISAR CORP    
            QSFP Part Number:    332-00389       
            QSFP Serial Number:  XZL0M65         
        Device Type:        XL710 B1, PBA J27441-003
        Firmware Version:   fw 5.20 nvm 5.04 etid 80003fb0
        Serial Number:      3CFDFEBCD5C0

  • Disabled/enabled the port in the node and switch doesn't fix the issue
  • A cable and QSFP re-seat doesn't fix the issue.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.