Applies to ONTAP 9.4P3 and later Virtual Port-Channel (vPC) on Cisco switch vPC down on Cisco switch id Port Status Consistency Reason Active vlans Bndl Grp Name 2 Port2 up failed vpc port channel xxx...Applies to ONTAP 9.4P3 and later Virtual Port-Channel (vPC) on Cisco switch vPC down on Cisco switch id Port Status Consistency Reason Active vlans Bndl Grp Name 2 Port2 up failed vpc port channel xxxx,yyyy VPC-XXXX_NetApp- mis-config due to AFF700-Node1 vpc links in the to different partners LACP ifgroup on ONTAP shows one port as down Interface Group Name a0a MAC Address 02:a0:98:xx:xx:xx Port Participation partial Network Ports e4e Up Ports e4e Down Ports e8e
X1144A 10/40 Gigabit Ethernet PCIe card XL710 QSFP+ Just one of the four ports connected to the card is down. slot 1: 10/40 Gigabit Ethernet Controller XL710 QSFP+ e1a MAC Address: 3c:fd:fe:bc:d5:c0 (...X1144A 10/40 Gigabit Ethernet PCIe card XL710 QSFP+ Just one of the four ports connected to the card is down. slot 1: 10/40 Gigabit Ethernet Controller XL710 QSFP+ e1a MAC Address: 3c:fd:fe:bc:d5:c0 (auto-10g_sr-fd-up) QSFP Vendor: FINISAR CORP QSFP Part Number: 332-00389 QSFP Serial Number: XZL0M65 Serial Number: 3CFDFEBCD5C0 Disabled/enabled the port in the node and switch doesn't fix the issue A cable and QSFP re-seat doesn't fix the issue.
Applies to All controller models 10G or 25G SFP+ / 40G or 100G QSFP Ethernet ports Issue Network port link LED may be ON. Ports are down operationally.