Skip to main content
NetApp Knowledge Base

Node does not boot with errors: "SP - FRU IPMI Read Error" and "This platform is not supported in this release"

Views:
1,185
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS3200
  • V3200

 

Issue

After a reboot, the storage controller fails to boot with output similar to the following:

Phoenix TrustedCore(tm) Server
Copyright 1985-2006 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 5.2.1
Portions Copyright (c) 2007-2012 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 4
Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz
Testing RAM
512MB RAM tested
8192MB RAM installed
6144 KB L2 Cache
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
ERROR
SP - FRU IPMI Read Error


***************************************************
 This platform is not supported in this release.
 The system will now halt
***************************************************

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device