Skip to main content
NetApp Knowledge Base

IOM6 modules with ACP in "updating-firmware" status for a mix of OoB and IB ACP

Views:
748
Visibility:
Public
Votes:
0
Category:
disk-shelves
Specialty:
hw
Last Updated:

Applies to

  • Shelves with IOM6 modules running firmware 2.10 or later
  • Nodes configured as ACP Out-of-Band (OoB)
  • Nodes not capable of ACP OoB (no e0P port), just In-Band (IB).

Issue

A cluster with different controller models and shelves with IOM6 modules, show ACP "updating-firmware". Example:

::> storage shelf acp module show -fields module-name,protocol-version,firmware-version,shelf-serial-number,iom-type,state
node_name       5.1.A       1.2.02.10        02.10        SHFHU1641000xxx     iom6     updating-firmware 
node_name       5.5.B       1.2.02.10        02.10        SHFHU1641000yyy     iom6     updating-firmware 

 

 
 
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.