Skip to main content
NetApp Knowledge Base

Host memory checksum mismatch on disk WRITE VERIFY

Last Updated:

Applies to

  • FAS storage nodes (AFF nodes not affected)
  • ONTAP 9.8 or 9.9.1
  • Local Fabricpool configuration with local- and cloud-tier on same node
  • HA-Pairs with one node hosting local-tier and HA-partner node hosting cloud-tier, affected on takeover


  • Tiering policy other than none is assigned to a volume and tiering to cloud-tier is active.
  • A node reboots unexpected with PANIC message:
Host memory checksum mismatch on WRITE VERIFY: Disk <disk_ID>, Disk Block #XXXX: Volume <Volume_name>, FileId XXX,File Block #XXX: Expected 0xYYYYYYYY, Recomputed as 0xZZZZZZZZ in SK process disk_server_0 on release 9.X (C)
  • A takeover can lead to the panic, if the takeover would bring cloud-tier and performance tier to one node.
  • When the partner node has issued HA takeover, it can experience the same unexpected reboot, leading to a HA-Pair outage.
  • If each node of an HA-Pair only owns either local- or cloud-tier, the PANIC is triggered only after takeover was issued.
  • RAID scrubbing after teh PANIC was hit uncovers parity errors, referring the cloud tier aggregate:

[node-02: raidio_thread: raid_rg_scrub_cksum_err_1:notice]: params: {'disk_rpm': '10000', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA01', 'shelf': '23', 'disk_info': 'Disk /<cloud_tier_aggregate>/plex0/rg1/0c.23.8 Shelf 23 Bay 8 [NETAPP   X343_TA15E1T8A10 NA01] S/N [XXX] UID [5000039B:3840A21C:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000]', 'site': 'Local', 'bay': '8', 'carrier': '', 'serialno': 'XXX', 'owner': '', 'model': 'X343_TA15E1T8A10', 'disk_type': '4', 'blockNum': '17612'}

[node-02: raidio_thread: raid_rg_readerr_repair_cksum_stored_1:notice]: params: {'disk_rpm': '10000', 'vendor': 'NETAPP  ', 'firmware_revision': 'NA01', 'shelf': '23', 'disk_info': 'Disk /<cloud_tier_aggregate>/plex0/rg1/0c.23.8 Shelf 23 Bay 8 [NETAPP   X343_TA15E1T8A10 NA01] S/N [XXX] UID [5000039B:3840A21C:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000]', 'site': 'Local', 'bay': '8', 'carrier': '', 'serialno': 'XXX', 'owner': '', 'model': 'X343_TA15E1T8A10', 'disk_type': '4', 'blockNum': '17612'}

  • Inconsistent user data blocks are detected, refering a <volume_name> on the local tier aggregate:

[node-01: wafl_exempt12:]: WAFL inconsistent: inconsistent user data block at VBN XXX (vvbn:XXX fbn:XXX level:0) in public inode (fileid:XXX snapid:0 file_type:15 disk_flags:0x8402 error:120 raid_set:1) in volume <volume_name>@vserver:<Vserver_UUID>.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device