Skip to main content
NetApp Knowledge Base

DIMM mapped out with error 0x30 during boot on FAS9000 and AFF A700

  1. Last updated
  2. Save as PDF
Views:
2,395
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF A700 with BIOS of 10.4 or earlier
  • FAS 9000 with BIOS of 10.4 or earlier

Issue

  • After a reboot, the system fails to boot with the error DIMM:x mapped out with the error code 0x30.
  • Error:

System DIMM configuration is not supported by AFF-A700
Halting...

BIOS Version: 10.4
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Cold Boot required for Memory Initialization.
System is resetting.

Initializing System Memory ...
DIMM:5 mapped out. BIOS MRC HW R/W test error. Major / Minor Error Code: 0x30 / 0x1C
Complete channel mapped out.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.