Skip to main content
NetApp Knowledge Base

Alert LED turned ON a Shelf without any other observed fault or DC UNDER VOLTAGE messages

  1. Last updated
  2. Save as PDF
Views:
2,686
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
hw
Last Updated:

​ ​

Applies to

  • DS2246
  • DS4486
  • DS4246
  • DS4243
  • Data ONTAP

 

Issue

  • Disk Shelf reports error message DC UNDER VOLTAGE, the LED is ON without any other indicating LED, or any failure message.
  • Depending on the version of Data ONTAP the system behaviour is different.
BUG ID
Symptom Notes
Fixed in
DC Undervoltage No errors reported in EMS
8.2.4 and 8.3.1
DC Undervoltage constant EMS reporting
8.2.4, 8.3.1P1, and 8.3.2RC2
DC Undervoltage EMS report every 6 hrs
8.3.2RC1
  • The storage show fault  output will indicate 'No faults found in storage subsystem'.
    However, the "storage show fault –v" will display the following status:

Power Supplies:
Element Status         Status Bytes  Status Descriptions
  1: OK                01,00,04,A0   DC UNDER VOLTAGE, RQSTED ON
  2: OK                01,00,00,A0   RQSTED ON

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.