Skip to main content
NetApp Knowledge Base

Multiple disks failed in FAS2750

Views:
502
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

FAS2750

Issue

There are multiple disks failed.
 
 
RAID group /DC_01_SAS_1/plex0/rg1 (partial, block checksums)
 
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0b.01.21P1 0b 1 21 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
parity 0b.01.23P1 0b 1 23 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data 0b.01.9P1 0b 1 9 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data 0b.01.11P1 0b 1 11 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data FAILED N/A 1118359/ -
data 0b.01.15P1 0b 1 15 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data 0b.01.17P1 0b 1 17 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data 0b.01.19P1 0b 1 19 SA:B 0 SAS 10000 1118359/2290399744 1118367/2290416128
data FAILED N/A 1118359/ -
data FAILED N/A 1118359/ -
data FAILED N/A 1118359/ -
Raid group is missing 4 disks.
 
environment status shows "1, 2, 5, 6".
 
SAS connector attached element list: 1, 2, 5, 6; with error: none
SAS cable information by element:
  [1] Vendor: XXXXX
      Type: MINI-SAS HD passive copper 0.5-1.0m ID: 01 Swaps: 0
      Serial number: XXXXXXXXXXXXXX Part number: 112-00435 A0
  [2] Vendor: XXXXX
      Type: MINI-SAS HD passive copper 0.5-1.0m ID: 00 Swaps: 0
      Serial number: XXXXXXXXXXXXXX Part number: 112-00435 A0
  [3] Vendor: (disconnected)
      Type: ID: Swaps: 0
      Serial number: Part number:
  [4] Vendor: (disconnected)
      Type: ID: Swaps: 0
      Serial number: Part number:
  [5] Vendor: XXXXX
      Type: MINI-SAS HD passive copper 0.5-1.0m ID: 01 Swaps: 0
      Serial number: XXXXXXXXXXXXXX Part number: 112-00435 A0
  [6] Vendor: XXXXX
      Type: MINI-SAS HD passive copper 0.5-1.0m ID: 01 Swaps: 0
      Serial number: XXXXXXXXXXXXXX Part number: 112-00435 A0
  [7] Vendor: (disconnected)
      Type: ID: Swaps: 0
      Serial number: Part number:
  [8] Vendor: (disconnected)
      Type: ID: Swaps: 0
      Serial number: Part number:
 
The single-path is shown even there are 0a/0b two paths connect to the shelf
 
Node: DC-01
  NetApp Release 9.4P1: Fri Jul 20 23:30:57 EDT 2018
  System ID: XXXXXXXXXX (DC-01); partner ID: XXXXXXXXXX (DC-02)
  System Serial Number: XXXXXXXXXXXX (DC-01)
  System Rev: C2
  System Storage Configuration: Single-Path HA
  System ACP Connectivity: Inband Active
  All-Flash Optimized: false
  Backplane Part Number: DS22412
 
Node: DC-02
  NetApp Release 9.4P1: Fri Jul 20 23:30:57 EDT 2018
  System ID: XXXXXXXXXX (DC-02); partner ID: XXXXXXXXXX (DC-01)
  System Serial Number: XXXXXXXXXXXX (DC-02)
  System Rev: C2
  System Storage Configuration: Single-Path HA
  System ACP Connectivity: Inband Active
  All-Flash Optimized: false
  Backplane Part Number: DS22412

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.