Skip to main content
NetApp Knowledge Base

Interconnect link, Width Degraded error

  1. Last updated
  2. Save as PDF
Views:
685
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

Applies to

AFF and FAS systems

Issue

The link width degraded errors are seen on interconnect links, link speed seen is 4x and the expected rate is 8X

Sat Apr 18 01:00:01 CDT [Node-A: statd: ic.linkWidthDegraded:error]: HA interconnect: Link width of link #0 degraded. Current: 4X, expected: 8X.
Sat Apr 18 01:00:00 CDT [Node-B: statd: ic.linkWidthDegraded:error]: HA interconnect: Link width of link #0 degraded. Current: 4X, expected: 8X.


Node A

slot 1: HSL Interconnect
  Data Rate:          40 Gb/s (4X) <-------------
  Link State:         ACTIVE
  Port HA0a State:    DOWN
  QSFP Vendor:        Molex Inc.
  QSFP Part Number: 112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>
  Port HA0b State:    ACTIVE
  QSFP Vendor:       Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>

Node B

slot 1: HSL Interconnect
  Data Rate:          40 Gb/s (4X) <---------------
  Link State:     ACTIVE
  Port HA0a State:    DOWN
  QSFP Vendor:        Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type: Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>
  Port HA0b State:    ACTIVE
  QSFP Vendor:        Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.