Skip to main content
NetApp Knowledge Base

FAS2720 Node BMC Reboots frequently following PCM incompatible error

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • FAS2720
  • ONTAP 9
  • Dual-controller configurations
  • Two node BMC FW already upgraded to SU383 fixed version

Issue

  • HA two nodes both reports FAN and Midplane error at ONTAP event log:

[monitor.globalStatus.critical:EMERGENCY]: Multiple fans has failed. Chassis temperature is too high.. Disk shelf fault.
[monitor.globalStatus.critical:EMERGENCY]: Multiple fans has failed. Chassis temperature is too high..

[env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 4 Temp) is not readable.
[env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 3 Temp) is not readable.
[env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 2 Temp) is not readable.
[env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 1 Temp) is not readable.

  • HA two nodes BMC reboot frequently and reporting Incompatible Partner PCM at BMC event log:

Record 558: Wed Oct 28 21:23:55.339656 2026 [BMC.critical]: Rebooting SP due to loss of ACP comms
Record 559: Sun Jan 01 00:00:23.663873 2017 [IPMI.notice]: 0106 | c0 | OEM: ffff70005100 | ManufId: 150300 | BMC Reset Internally
Record 680: Wed Oct 28 21:41:33.889832 2026 [ASUP.notice]: First notification email | (INVALID CHASSIS CONFIGURATION (Incompatible Partner PCM)) CRITICAL | Send failed

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.