Skip to main content
NetApp Knowledge Base

Call home for CHASSIS FAN FRU FAILED sensor BAD No Reading

  1. Last updated
    May 7, 2025
  2. Save as PDF
Views:
1,451
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:
5/7/2025, 1:26:12 AM

Applies to

  • ONTAP 9
  • Chassis FAN

Issue

  • The following errors are reported in event logs:

[Node-02: env_mgr: monitor.chassisFan.stop:debug]: Chassis fan contains at least one stopped fan: Fan1 (0 RPM)
[Node-02: env_mgr: callhome.c.fan.fru.fault:debug]: Call home for CHASSIS FAN FRU FAILED: Fan1

OR

[Node-04: env_mgr: monitor.chassisFan.stop:debug]: Chassis fan contains at least one stopped fan: Sysfan4_F2_Speed (failed)
[Node-04: env_mgr: callhome.c.fan.fru.fault:debug]: Call home for CHASSIS FAN FRU FAILED: Sysfan4_F2_Speed

  • The sensor status for one or both fans is "BAD" in the SP sensors section:
Fan2 State     discrete     normal            normal     GOOD
Fan1 State     discrete     fault             normal     BAD
 
Sensor name      | reading    | unit  | status| lnr       | lcr       | lnc       | unc       | ucr       | unr   
Sysfan4_F1_Speed | 9204.000   | RPM   | ok    | 0.000     | 936.000   | 2964.000  | 33072.000 | 34008.000 | 34944.000 
Sysfan4_F2_Speed | 0.000      | RPM   | nr    | 0.000     | 936.000   | 2964.000  | 33072.000 | 34008.000 | 34944.000 
 
OR
    Fan1_1           | 70h | ok  | 29.1 | 9100 RPM
    Fan2_1           | 71h | ok  | 29.2 | 9000 RPM
    Fan3_1           | 72h | ok  | 29.3 | 9100 RPM
    Fan4_1           | 73h | ok  | 29.4 | 9100 RPM
    Fan1_2           | 74h | ns  | 29.1 | No Reading
    Fan2_2           | 75h | ok  | 29.2 | 9200 RPM
    Fan3_2           | 76h | ok  | 29.3 | 9000 RPM
    Fan4_2           | 77h | ok  | 29.4 | 9100 RPM
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.