Skip to main content
NetApp Knowledge Base

StorageGRID Low System Data Capacity - AutoSupport Message

  1. Last updated
  2. Save as PDF
Views:
417
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

Applies to

NetApp StorageGRID

Event Summary

StorageGRID reports LowSystemDataCapacity indicating system data on the /var/local is low

Validate

  1. Login to the Primary Admin node
  2. Run df -h
  3. Verify space usage under /var/local

Resolution

  1. Verify if the space usage has already dropped below the threshold by running the df -h command
  2. Verify if the issue is related to one of below knowledge base articles:
  3. Verify if there is an old Lumberjack log, delete it if it is not needed
  4. Contact NetApp Technical Support if the available space continues to decrease and above articles are not applicable.

Additional Information

The /var/local space usage may increase temporarily when gathering log files

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.