Skip to main content
NetApp Knowledge Base

What are CRC and underrun errors?

Views:
2,334
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
7dot
Last Updated:

 

Applies to

Data ONTAP 7 and earlier

Answer

 

  • CRC errors exist in the data payload of frames that circulate through a Fibre Channel-Arbitrated Loop (FC-AL). The errors are detected by devices inside the loop when Data ONTAP writes to a disk-for example, a disk or ESH module. The error-detecting device generally is not responsible for the errors. 
  • When CRC errors are detected, Data ONTAP retransmits the affected data. Usually, these errors are transient, so a retransmission will clear the problem. Data ONTAP attempts to repath and retry the I/O operation three times. If three retransmissions are unsuccessful, Data ONTAP will fail the disk. 

Note: When troubleshooting CRC errors, keep in mind that the device causing the CRC error exists somewhere before the disk reporting it in the loop. Use the "fcadmin link_stats" and "device_map" commands to see what comes before the failed disk in the loop.

  • Underrun errors happen when a read operation, requested by the initiator, gets corrupted by a device on the path between the disk (to be read) and the initiator (filer adapter). When troubleshooting increasing underrun errors, examine devices after the one reporting the error; most of the data flow that could get corrupted will be reads from the disk to the initiator.

Additional Information

Add your text here.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device