Home
Legacy
Legacy ONTAP
Data ONTAP 7-Mode

Data ONTAP 7-Mode

Last updated

May 8, 2023
Save as PDF
Share
1. Share
2. Tweet
3. Share

Data ONTAP 7-Mode

Other Resources

Here is some sample text for the Resolution Guides tab.

Article directory

#
- "No such file or directory" and "?" appear in out of an 'ls -la' via NFSv4.x
- "sis.changelog.full" warning message in EMS log in 7-mode
- 0 Kb files are created when hard quota limits are hit
- 7 mode node showing cmd_system: exec_status=5 error
- 7 Mode Transition Tool (7MTT) stops after power outage
- 7-mode Auto-upgrade Disk Firmware Failed
- 7Mode exports for one volume not working after reboot
- 7-Mode filer looses connection to DC with RC4 is disabled on the domain
- 7-mode How to set up CIFS auditing on the controller
- 7-mode How to set up file level auditing for deleted files
- 7-Mode NDMP "Too many exclusions" error
- 7-mode NFS clients fail to mount or access Windows-style directories with CIFS auditing enabled
- 7-mode node performs an emergency shutdown and takeover occurs
- 7-Mode Phantom volume can't be deleted "This operation is not supported on 7-mode volume 'vol0'"
- 7-mode SM No route to host
- 7-Mode SnapMirror initialization fails with an abort after moving lots of data
- 7-Mode Transition Tool (7MTT) SnapMirror baseline transfer fails
- 7-Mode Transition Tool (7MTT) using Local LIFs SnapMirror transfer fails
- 7-Mode Transition Tool reports insufficient space in destination cluster
- 7-Mode unable to access CIFS shares after node power up
- 7Mode unable to access CIFS shares after node reboot
- 7-Mode: How to get a list of cifs shares without access to the ETC$ share
- 7-Mode: How to Non-disruptively power cycle, replace or change shelf IDs in MetroCluster
- 7-Mode: SyncMirror Plex Failed
- 7-Mode: SyncMirror Plex Failed - mutliple failed disks
- 7MTT - Blocking Error in Precheck - SVM is not added to the/etc/snapmirror.allow file of a 7-Mode storage system
- 7MTT - CIFS shares created with incorrect mount path after cutover
- 7MTT - The source volume languages are ‘undefined’; will 7MTT require a change of the source volume language before a migration to clustered Data ONTAP?
- 7MTT - Transition start failed - Error onlining volume "vserver_name:volume"
- 7MTT - Transition start failed - Error: Unable to set volume attributes for volume
- 7MTT Collect and Assess Tool does not collect data due to handshake failure
- 7MTT Copy-Based Transition - Consolidation of volumes from multiple 7-Mode storage systems or vFiler units into a single SVM using the v2.0 or later versions of the tool
- 7MTT Copy-Based Transition - How to handle the scenario where 7-Mode data-copy IP address is not reachable from target cluster intercluster LIFs
- 7MTT detects 32 bit snapshots on a volume that contains only 64 bit snapshots
- 7MTT Error 01061 job failed. Reason: A technical error has occurred. Contact Technical Support
- 7MTT Error 02012 job failed. Reason: A technical error has occurred. Contact Technical Support
- 7MTT Error 507
- 7MTT errors out Authentication failure with 7-Mode Transition Tool server
- 7-MTT errors out when performing an assessment on ONTAP cluster
- 7MTT fails to run and browser page is not found
- 7MTT MetroCluster Precheck Error 88020: Details error 16035 "admin password not set"
- 7MTT migration does not retain the domain information in “Quota target” due to numeric values in user name
- 7MTT Precheck 10111 - How to transition 7-Mode volumes that have qtree level exports
- 7MTT Precheck 10112 - How qtree client access through a parent volume differs in Data ONTAP 7-Mode and clustered Data ONTAP
- 7MTT precheck 40293: Transitioning name servers if specified together within Data ONTAP 7-Mode and SVM are more than three
- 7MTT pre-check fails as 7-mode system is not reachable from a cluster node
- 7MTT prechecks fail with error 75002 due to local user exceeding the max limit
- 7MTT Process
- 7MTT projects cannot be accessed
- 7MTT to clustered Data ONTAP migration fails with "Reason: A technical error has occurred"
- 7MTT transfer fails due to TDP destination volume on the cluster
- 7MTT Transition Mode Error Message 20933 Error Code 337 Failed Processing Line 25 of the input file
- 7mtt unable to add cluster
- 7MTT v2.0/Transitioned Data ONTAP features
- 7MTT v2.0: Detailed description of configuration transition/manual steps: Networking, RBAC, SNMP, and Other features
- 7MTT v2.0: Detailed description of configuration transition/manual steps: SnapMirror, NameServices, and WAFL
- 7MTT: To resolve a firewall issue when transitioning CIFS local users and group configurations
- 7MTT: Create one or more intercluster LIFs on the affected nodes
- 7MTT: How to resolve TLS or SSL communication issue
- 7MTT: Pre-check failure on CIFS local users and group
- 7MTT: volume is not shown
- 'df' command hangs for NFSv3 clients in 7-Mode
A
- Access to the system only available through SP
- ACP Connectivity Status: Partial Connectivity
- ACP not-responding
- acp.module.unresponsive:error
- Active IQ Digital Advisor (AIQDA): Mismatch between AIQDA and contract (7-Mode)
- After applying MS security patch Audit liveview stopped working
- After cifs domain migration, old domain name still shows while applying permission using windows Explorer
- After configuring a user quota for all users, administrator sees different space available
- After deleting SnapVault relations between a source and destination, on the destination, some relationships are still showing
- After enabling SMB signing, the old SMB session may become inaccessible
- After migration from 7-mode to Ontap 9 permissions getting changed on CIFS path
- After takeover, NFS mounts hang in Data ONTAP 7-mode
- After upgrade to ONTAP 8.2.5 7-Mode, unable to ssh to controller
- After volume migration from 7-Mode to cDOT, some NFS clients can not longer mount volumes
- Aggregates are in a double degraded or double reconstruct state
- AIX node can connect to one 7-Mode node VIF, but not its partner
- All CIFS clients cannot open or create new file with open file reach Max limitation
- All CIFS shares unavailable - Data ONTAP operating in 7-Mode
- All files/folders Unix permissions get changed from 777 to 700 after migration of a NTFS volume from 7-Mode
- All local admin accounts except root stopped working after upgrade to ONTAP 8.2.5P5
- API invoke failed - Unable to get status from NetApp system
- Application unable to write to NAS with error: "File too large"
- Are root and administrator actually the same account on a filer?
- Are these 7-mode vserver properties available in ONTAP: cifs.neg_buf_size, cifs.changenotify.buffersize, smb_boxcar_expire_ms
- ASUP is triggered normally but is not received by NetApp
- AT-FCX: CEMI Micro Controller Fatal Error causes an AT-FCX module to become unresponsive
- Attempt to create pipe LSA for LsarLookupSids failed with error 0xc000005e
- Attempting to add ONTAP cluster to 7MTT project fails mentioning system-get-info API
- Authentication error: "Unable to acquire filer credentials. Client not found in Kerberos database"
- AutoSupport delivery fails due to DNS - Couldn't resolve host in Data ONTAP 7-mode
- AutoSupport fails delivery with error Operation timed out in Data ONTAP 7-mode
- Autosupport Message: RAIDTREE ASSIMILATION FAILED
- AutoSupport message: (Exceeded maximum raw capacity) CRITICAL
- AutoSupport message: ARS Partial Path Transition
- Autosupport Message: Call home for REBOOT (panic) ONTAP 7-mode
- AutoSupport Message: Chassis Power Degraded
- AutoSupport message: DISK RECONSTRUCTION FAILED for Data ONTAP 7
- AutoSupport message: OINODE:System Notification from filername (OUT OF INODES) ERROR
- Autosupport Message: RDVLFA:HA Group Notification from filer1 (RAID VOLUME FAILED) ERROR
- AutoSupport message: RLM HEARTBEAT STOPPED
- AutoSupport message: RLMHBL:System Alert from RLM of Filer1 (HEARTBEAT_LOSS) WARNING
- AutoSupport message: SNAPVALIDATOR ERROR PREVENTED
- Autosupport OnDemand fails - Account currently locked (7-mode)
- AutoSupport reports "Logical Unit Number mapping or igroup type misconfiguration has been detected"
- AutoSupport using SMTP shows sent-successful but is not received internally or by NetApp in Data ONTAP 7-mode
- Available space in volume does not increase after file deletions when the snap reserve exceeds 100% utilization
B
- Baseline copy fails as 7-mode storage system is not reachable
- BIOS update fails with "SPI device not supported" message
C
- Can I abort 7-Mode SnapMirror re-initialization to save the destination volume?
- Can I add an alias or alternate IP to a vif (ifgrp)?
- Can I change the LUN type from image to linux?
- Can I install signed SSL certificates on 7-Mode Transition Tool (7MTT)?
- Can I manually fail a disk that is not responding?
- Can NDMP restore 7-mode's backup to ONTAP 9
- Can Network File System(NFS) mount the filer from one client, but cannot mount successfully from another type?
- Can ONTAP 8 use LDAPS with AES encryption?
- Can the cf giveback -f command be disruptive?
- Can X336A be used in ONTAP 8.2.3 7-mode?
- Cannot delete or rename a file, an empty directory or qtree
- Cannot mount or access an NFS volume
- Cannot see tab for previous versions of some shares in a volume on 7-mode
- Cannot send AutoSupport e-mail, error message: Unknown User
- Case sensitive behavior of the /etc/quotas file cause the error message: quota: can't stat file [Path_to_NTFS_qtree]: No such file or directory (/etc/quotas line [line_number])
- CBT : How to provide all the required primary 7-Mode details for a given secondary project
- CIFS and NFS access fails while in failover due to difference in Preferred DCs (7-Mode)
- CIFS audit log cannot be saved and viewed
- CIFS auditing does not work for some folders
- CIFS auditing stops on the vfiler due to no space left on the volume for audit logs
- CIFS clients behind NAT get disconnected intermittently
- CIFS connections denied: Unable to acquire filer credentials: (0x96c73a12) Clients credentials have been revoked
- CIFS fails after upgrade to domain controllers for Data ONTAP 8 7-Mode
- CIFS inaccessible by some clients using DNS name after AD object password reset
- CIFS not working after upgrade of Data ONTAP operating in 7-Mode
- Cifs Performance may be impacted due to spamming failed user logons in ONTAP 7-mode
- CIFS setup fails with "No Kerberos keys for this account in Active Directory"
- CIFS share inaccessible after disabling RC4 on 7mode and DC
- CIFS Shares cannot be added to Volume/qtree which was transitioned from 7-Mode System
- CIFS shares missing in cluster mode after migrating the data using 7MTT
- CIFS shares not accessible after domain controller upgrade in 7-mode
- CIFS user's able to execute .exe and .dll files when UNIX executable bit is not set
- CIFS: Error for server \\HOST: CIFS Session Setup Error STATUS_ACCESS_DENIED
- CIFS: Error on named pipe with MachineName: Error connecting to server, open pipe failed in 7-Mode
- Clients unable to authenticate via Shortname/alias using Data ONTAP 7-Mode
- clustered data ontap version is not supported by 7MTT Tool
- Common Internet File System protocol stops responding after all vscan servers are disconnected
- Controller Chassis Amber LED ON after reinstall ONTAP 9.8 from 8.2.5 7-mode
- Controller disruption on forced closure of CIFS session
- Controller panics during Data ONTAP 7-MODE migration
- Could not allocate V4Owner object for the client '10.12.13.1'
- Could not enable high_security option
- Creation of new folder by CIFS users fails with error " could not find this item"
D
- Data access routing through e0M after reboot
- Data ONTAP 7Mode Vfiler migrate fails with Connection refused error message
- Data ONTAP 7mode weekly Autosupports are not sending due to many log files
- Data ONTAP 8 - Spare disks for zoned and advanced_zoned checksum
- Data ONTAP fails to netboot with PANIC: Going nowhere without my init
- Dedup savings are not reflected on the CIFS share and NFS exports
- Deduplication attempt on a volume fails with error: Failed to save configuration
- Deep/wide directory structures might cause noticeable CPU overhead
- Deleted snapshot does not release space in volume/aggregate
- Disconnecting: Protocol error: expected packet type 21, got -1
- DIsk firmware upgrade issue
- disk ownership is removed during offline/online
- Disk Sanitization info for 7-mode
- Disk showing 'init failed' after replacement on ONTAP 7-mode system
- disk speed is shown incorrect
- Disks are not owned or report a Bad label after running the disk sanitize release command
- DNS troubleshooting for multiple network issues on Data ONTAP 7-mode
- Does 7 MTT require rebaselining after a physical relocation of 7-mode or C-mode systems?
- Does CVE-2022-38023 have any impact to Data ONTAP 7-Mode
- Downloading ONTAP image fails with "/mnt: write failed, filesystem is full"
- During disk prefail LUN Reset request and aborting all SCSI
E
- EMS event "Unable to Acquire Filer Credentials"
- EMS reports raid.mirror.resync.snapcrtfail:error No space left on device
- Enabling deduplication fails with Operation is not configured error following 7MTT migration
- Error message: Decrypt integrity check failed
- Error message: Permanent errors on all HA mailbox disks (while writing master block) in process fmmbx_instance
- Error Message: Unable to acquire filer credentials: (0x96c73a18) Invalid password
- Error while trying to add 7-mode Filer to 7-Mode Transition Tool (7MTT): Failed to communicate with the host system using TLS or SSL protocols
- Error: The software driver for the Remote LAN Module (RLM) has detected a problem: Configuration Error (1)
- Ethernet RLM and e0M interface keeps going down
- Excessive messages logged for host not found in netgroup
F
- Fail to add new SNMP traphost in 7-mode
- Failed to add 7 mode system to Cloud Insights
- Filer console freezes after enabling vscan on 7 MODE system
- FlexVols migrated from Data ONTAP 7-Mode show higher-than-expected space usage
- Fpolicy fails to Register on 7-Mode CIFS with KRB5KRB_AP_ERR_MODIFIED due to CrowdStrike
G
- Getting password prompt when user doesn't have permission to access the share
H
- Ha pair does not synchronize with timeserver in Data ONTAP 7
- Health Monitor process nchm: HbaPortsAB_Alert
- High CPU utilization with many concurrent 'block ownership' scanners
- High latency for NFS clients & servers inaccessible
- High latency observed on all volumes hosted on 7mode
- High number of CIFS Audit Files impacts performance in 7-Mode
- High user latency seen but ONTAP latency low for Data ONTAP 8 7-mode
- Home directories do not work after Data ONTAP upgrade to 8.2.2
- Hourly "Automatic shutdown sequence cancelled." messages following PSU replacement on FAS2040
- How can I nest NFS exports?
- How can you check the status of a Wafliron in ONTAP 7-mode
- How concurrency can impact throughput performance with Data ONTAP 7-Mode
- How do I mount a volume to the legacy 7mode format "/vol"
- How do I track down a misbehaving UNIX or Linux NFS client in 7-mode
- How does a VIF MAC address get assigned in ONTAP 7?
- How does Data ONTAP 8 7-Mode work with Windows server patched for KB4520003?
- How does Data ONTAP 8.2 7-mode enforce the license keys?
- How does file locking prevent access?
- How does load balancing on a VIF work?
- How does NVFAIL work with LUNs in Data ONTAP 7-mode?
- How does the Snapshot reserve work?
- How does the volume language work on storage systems running Data ONTAP 7-mode?
- How many pblks (parameter blocks) are available to NetApp controllers or MultiStore vFilers?
- How to access a core file from a node that has gone down in 7-Mode
- How to access Data ONTAP 7-Mode log files using HTTP (web admin interface)
- How to access files from both Windows/CIFS and UNIX/NFS user accounts in 7-Mode
- How to access snapshots from NFS clients
- How to add a resource in a vFiler DR configuration
- How to add larger capacity disks to a RAID group that contains smaller capacity disks
- How to add users to the BUILTIN\ADMINISTRATORS group for a storage system
- How to add Windows domain global groups to filer local groups using the useradmin command
- How to adjust the Maximum Transmission Unit (MTU) for a Data Ontap interface (7-Mode)
- How to approach FlexCache performance issues (7-mode as origin and flexcache server)
- How to boot a node after a power loss or a high-temperature shutdown in ONTAP 8 7-mode
- How to calculate a volumes usable and physical space
- How to change default 7-mode permissions for NFS access to CIFS protocol files
- How to change directory/file ACLs using the NetApp tool "secedit.exe"
- How to change security styles for 7-mode volumes or qtrees
- How to change the default gateway to a new gateway
- How to change the IP address of a DR vFiler
- How to change the IP address of an interface in 7 mode system?
- How to change the raid scrub schedule
- How to check failed (cf) giveback operation in 7-Mode
- How to clear the ARP table
- How to collect a network trace with pktt in Data ONTAP 7-Mode
- How to collect performance data live for Data ONTAP 7-mode
- How to collect rolling packet traces in 7-mode
- How to collect the 7MTT log files
- How to completely remove SnapVault relationships (7-mode only)
- How to configure a qtree which can be accessed by both Unix and Windows users in ONTAP 7-Mode
- How to configure and enable remote shell (rsh) access on a storage system
- How to configure FTP / SFTP to use Windows authentication
- How to configure LIF failover destinations in Data ONTAP 8.1 Cluster-Mode
- How to configure NetApp storage systems for Network File System version 4 in AIX and Linux environments
- How to configure no_root_squash for Data ONTAP 7-Mode
- How to configure RSH on a Windows 2008 server
- How to configure SFTP on a 7-Mode storage system
- How to configure SnapMirror through a firewall in 7-mode
- How to configure SNMP with user-defined traps
- How to configure the IP address of a new interface in 7 mode system?
- How to control access to a Snapshot directory
- How to control the SMB 2.1 feature in Data ONTAP 8.2.3 operating in 7-Mode
- How to convert a clustered Data ONTAP 8.x node to a 7-Mode node
- How to copy a qtree from one volume to another volume
- How to create a read-only user to monitor a 7-mode storage system with System Manager or Unified Manager 5.x
- How to create a sync core in Data ONTAP 7-mode from a hanging/unresponsive storage system
- How to create the C$ and ETC$ CIFS shares in Data ONTAP 7-Mode
- How to delete a qtree or directory
- How to delete a snapshot
- How to detect corruption of stored data blocks
- How to detect solid-state drives (SSDs) life used rate for Data ONTAP 7-Mode?
- How to determine optimal unmap granularity
- How to disable SSLv3 for System Setup
- How to display security permissions of a file or directory in a volume
- How to display the security permissions of a file from the 7-mode filer
- How to display the security permissions of a file from the filer
- How to download disk firmware when upgrading Data ONTAP
- How to enable and verify SMB signing when using the DataFort
- How to enable DNS in ONTAP 7-mode without using setup
- How to enable NDMP debug logging for Data ONTAP 7-mode
- How to Enable NFS Extended Groups in Data ONTAP operating in 7-Mode
- How to enable UNIX Style SFTP authentication
- How to find SNMP Object IDentifier (OID) based on Management Information Base (MIB) element
- How to find the WWPN of an FCVI port in Data ONTAP 7-mode
- How to get to the LOADER prompt from Data ONTAP 8 7-mode
- How to grant and remove access to CIFS shares
- How to guarantee machine account access to a CIFS share
- How to identify a failed disk prior to replacement in Data ONTAP 8.2.5 7-mode
- How to identify CIFS latency caused by Offbox services in ONTAP (DC,LDAP, VSCAN, FPOLICY)
- How to increase the maxdirsize in Data ONTAP 8?
- How to increase the maximum number of files in Data ONTAP 8 7-mode
- How to increase the TCP window to its maximum setting for Data ONTAP 7-Mode
- How to list NFS connected clients in Data ONTAP 7-mode
- How to look for Master license keys
- How to lower Network File System (NFS) operations by enabling NFS client attribute caching
- How to make major changes to vif configuration with minimal impact to system availability
- How to manage Data ONTAP 8.2 AutoSupport subsystem size and time budgets
- How to manually upload AutoSupport messages to NetApp in Data ONTAP 8.1 and 8.2 7-Mode
- How to map Management Information Base (MIB) name to Object IDentifier (OID)
- How to migrate a filer to a new domain
- How to migrate a vfiler to a new domain
- How to monitor Antivirus (Vscan) in Data ONTAP 7-Mode
- How to move a destination Qtree SnapMirror or SnapVault from one volume to another without requiring a new baseline transfer between primary and secondary
- How to move a mount point without having to reconfigure the NFS clients
- How to move a SnapVault or SnapMirror primary from one volume to another volume without new baseline
- How to move a vfiler from one volume to another within the same filer?
- How to move or rename the root volume on a storage system
- How to Netboot clustered Data ONTAP 8.1x (and later)
- How to obtain a packet trace file off a storage system when CIFS or NFS is not functioning properly for Data ONTAP 7-Mode
- How to perform 64-bit aggregate conversion using CLI in Data ONTAP 7-Mode and clustered Data ONTAP
- How to perform a Data ONTAP 7-Mode takeover and giveback
- How to perform a graceful shutdown and power up of Data ONTAP 8.2 (7-mode) storage system
- How to perform a health check in Data ONTAP 8 7-mode
- How to perform a non-disruptive change between Active-Passive (RDAC) and ALUA host types on E-Series arrays connected to ONTAP 7-Mode systems
- How to perform a system health check in Data ONTAP 8 7-mode using AutoSupport in Active IQ
- How to perform MetroCluster failover method for a planned site-wide maintenance not requiring CFOD
- How to perform ndmpcopy from a ONTAP 7-Mode volume to clustered ONTAP volume
- How to perform volume reallocation in Data ONTAP operating in 7-Mode
- How to perform Windows authentication and Windows-to-UNIX usermapping in ONTAP 7-Mode
- How to power down and power up the controllers in a 7-Mode HA-Pair
- How to receive ActiveIQ upgrade advisor for 7-mode systems
- How to recover a deleted file from a snapshot using Network File System (NFS) or Common Internet File System protocol (CIFS)
- How to recover a SnapVault source from deletion
- How to recover CIFS shares
- How to rename the hostname on a 7-mode filer without rebooting
- How to renew an SSL certificate in Data ONTAP 7-Mode
- How to repurpose a Data ONTAP 8.1.x or later 7-Mode node to ONTAP 9
- How to repurpose an ONTAP 9 HA Pair with Data ONTAP 7-Mode
- How to repurpose physical storage in Data ONTAP 8 7-mode
- How to reset root password from boot menu ONTAP 7-Mode
- How to resize a flexible volume
- How to run pre-cutover tests again in 7MTT projects
- How to sanitize a storage system at the end of a lease or demo
- How to send SSH commands to the storage system without being prompted for a password
- How to set Additional User Rights Assignments on a NetApp storage system using Active Directory
- How to set NTFS or Storage Level Access Guard security using SDDL files and fsecurity apply for Data ONTAP 7-mode
- How to set the configurations on VIOS and VIOC for better performance of iSCSI with ONTAP/Data ONTAP to ensure best performance
- How to set the correct SPN for a storage controller
- How to set up and troubleshoot Widelinks on a Netapp 7-mode Storage Controller
- How to set up anonymous FTP on a 7-mode filer
- How to set up Kerberized NFS access for a UNIX client in an Active Directory KDC
- How to set up NTP time synchronization in Data ONTAP 7-Mode
- How to set up or modify AutoSupport in Data ONTAP 7-mode
- How to set up SnapMirror replication throttling for system and individual transfers of 7-Mode?
- How to setup SSH public key authentication on Windows using PuTTy
- How to show consumed LUN space
- How to suppress automatic case creation during scheduled maintenance windows - Data ONTAP 7-mode
- How to suppress automatic case creation during scheduled maintenance windows - Data ONTAP 8 (7-mode)
- How to suppress console logging messages in Data ONTAP 7-mode
- How to swap ISLs between fabrics in a 7- Mode fabric MetroCluster using 1 ISL per fabric
- How to tell whether a Field Replaceable Unit (FRU) was actually replaced
- How to test SNMP trap on 7-Mode?
- How to transition 7-Mode NFSv3 exports to Clustered Data ONTAP using NetApp XCP Migration Tool
- How to transition CIFS configurations when Active Directory Domain of CIFS server on 7-Mode and target SVM are different
- How to transition the 7-Mode SnapLock Compliance volumes with SnapMirror relationship to clustered Data ONTAP
- How to troubleshoot ifgrp issues in 7-Mode/ONTAP 9.1 and prior
- How to troubleshoot issues with SSH in Data ONTAP 7-Mode
- How to troubleshoot Microsoft Client permission issues on a Data ONTAP 7-Mode storage system
- How to troubleshoot pBlk exhaustion due to Fpolicy Server
- How to troubleshoot pBlk exhaustion due to vscan server on Data ONTAP 8 7-Mode
- How to troubleshoot performance issues in Data ONTAP 8 7-mode
- How to troubleshoot unexplained takeovers or reboots
- How to troubleshoot with "netstat -na"
- How to turn off access to .snapshot directory from clients
- How to unfail a disk - Data ONTAP 7-mode
- How to update the syslog.conf without rebooting the storage system?
- How to update time zone information in Data ONTAP 7-mode
- How to upgrade Data ONTAP or shelf_fw and disk_fw via FTP when Network File System (NFS) or Common Internet File System protocol (CIFS) is not licensed
- How to upload a Data ONTAP 7-Mode core file for analysis
- How to upload system file to software directory without Common Internet File System Protocol (CIFS) or Network File System (NFS)
- How to upload the image in the Controller using HTTP
- How to use lun snap usage -s when deleting busy snapshot copies
- How to use smtape to seed a SnapMirror relationship over USB/disk on 7-Mode systems
- How to use SnapRestore to restore a LUN in Ontap 8 7-Mode
- How to use SnapRestore to restore a single file in Ontap 8 7-Mode
- How to use SnapRestore to restore a volume in Ontap 8 7-Mode
- How to use the route add command
- How to verify NTP operation in Data ONTAP 8 (7-Mode and clustered Data ONTAP)
- How to view Qtree protocol IOPs in 7-Mode
- How to view snapshots and determine the size of snapshots
- How to resolve 7-Mode Transition Tool(7MTT) error 20875
I
- If SnapMirror initialization takes several weeks, does Snapshot have a problem for over 255 Snapshot creation?
- Ifconfig output reports no such interface
- Installation of Trend Micro Antivirus software fails - Access to files denied when vscan is enabled
- Invalid qtree name error in Quota initialization
- Is it possible to continue to transfer the normal volumes by "remove" the volumes that are no longer available for 7-Mode Transition Tool (7MTT) transfer?
- Is it possible to migrate data from 7-mode 32-bit volume to cluster mode 64-bit volume using XCP?
- Is it possible to migrate data from 7-Mode to FSx for ONTAP using SnapMirror?
- Is it possible to restore backed-up data of a 7-Mode volume from tape to CDOT?
- Is it possible to specify the disk that will replace a failed disk drive using the disk fail command?
- Is ONTAP 9.12 supported as a target for migration with the 7MTT?
- Is software based data at rest encryption supported for 7 mode systems?
- Is there a way to export 7MTT projects from one workstation and import them on another so that someone else can initiate the cutover?
- Is there a way to migrate CIFS shares from 7-mode to C-mode after 7MTT cutover?
- Is there patch planned for CVE-2022-38023 on 7-mode?
- Is there risk if language setting is changed for an existing 7-mode volume?
L
- License add: invalid license key "....", license keys must be 28 or 42 letters in length
- Limitations of computer account authentication using NTLM causes access to be denied when attempting to access files on a CIFS share
- LUNs or NFS mount not accessible after DR Operation (CFOD)
- LUNs served by iSCSI not visible after host maintenance
M
- Metrocluster system in Mixed-Path due to no more valid paths to enclosure services
- Microsoft patch(CVE-2022-37966) forcing AES for Kerberos authentication - CIFS outage
- Migration of a Data ONTAP 7-Mode qtree Snap-vault destination volume fails
- Mismatch in definitions listed in the /etc/hosts and /etc/rc files
- Mount fails with error "Operation Not Supported" in Data ONTAP 8 7-Mode using Ubuntu
- Mounting a volume fails with Stale Network File System (NFS) file handle error
N
- Netbooting a Data ONTAP 7-Mode System
- Network File System (NFS) attribute caching may cause permission inconsistencies between the filer and NFS client
- Newly installed 7MTT tool doesn't start
- NFS access issue after motherboard replaced
- NFS operations on FlexCache cache or origin volumes hang when in disconnected mode
- NFS permission denied when using netgroups in /etc/exports file
- NFS Server not responding on HPUX 11 and 11i server
- NFS unreachable after vfiler migration
- NFSv3 unable to mount after 8.2.5 to 8.2.5P5 upgrade 7-mode
- Node down and partner not in takeover
- Node unreachable via management interfaces
- Not able to mount CIFS share using SMB2 on RHEL 7 with Error "Operation not supported"
- NSE: How to replace a Mother Board in an HA configuration with NSE ( ONTAP 8.3 and Lower )
O
- OCI 7-Mode datasource intermittent gap in IOPS graphs
- ONTAP appears to generate two screen requests to the FPolicy Engine for a single file
- ONTAP reports "Shelf ?" on newly added DS224c shelf
- ONTAP reports an error message "CIFSRPC: Ignoring invalid share-level acl"
- Operation not Supported error on RHEL when setting NFSv4 access control list (ACL)
- OSSV backup fails with error: Error creating volume snapshot: Unknown VSS error code 0x80042302
- OSSV Cannot connect to source filer
- OSSV Quick Start Guide - OSSV Setup, Backup, Restore, and Troubleshooting
- OSSV SystemState backup fails with error message: could not read from socket
P
- Panic due to a fragmented NETLOGON response
- Panic due to giveback process is hung (vfiler_low_level) in SK process
- Panic string: raid volfsm: vol volume_name fatal multi-disk error. in process config_thread on release NetApp Release 7.x.x
- pBLK exhaustion due to High CIFS audit workloads
- Pending data is seen in SnapMirror Details section of 7MTT tool after successful update in Precutover
- Performance issues on ethernet networks when the e0m management interface is on the same subnet as production traffic
- Permission denied when mounting file system with NFS v4
- Permissions Changed by NFS Client
- PING from PC to NetApp interfaces replies with (DUP!) entry
- Poor performance in Data ONTAP 7-Mode due to excessive file deletions
- Priority is causing workload latency
Q
- Qtree SnapMirror or SnapVault rollbacks fail with the error: Rollback_failed (cannot connect to source filer)
- Quota and name-mapping error during 7MTT migration
- Quota report displays discrepancy
- Quota report displays multiple entries for domain users
- Quota report displays SID and UID numbers
- Quota Report not reporting correct number of files or amount of space
- Quota reports display UIDs instead of usernames
- Quota resize returns message skipping new definition
- Quotas
R
- Repeated node panics due to SnapMirror relationships from a 7-mode system
- Reset 7-mode root password when the currently password is un-know
S
- s FTP a supported server protocol in ONTAP 7-mode?
- Single Mode VIF is inaccessible: VIF status reports the single mode VIF as Broke
- SMB1 detected as enabled on Data ONTAP 7-Mode controller where SMB1 has been disabled
- Snapmirror schedule does not trigger any transfer
- SnapMirror snapshots are not deleted automatically in 7-Mode
- SnapMirror transfers are slow from 7-Mode to cluster mode
- Snapshot locked by SnapVault could not be deleted
- Snapshots are showing as busy
- Snapshots size shows 0KB or changes after creation in Data ONTAP 7-Mode
- SnapVault relationship is not removed when running snapvault stop command
- Snapvault snapshots on source volume are not being rolled off as per the retention in 7 mode
- SnapVault start or update results in "the qtree is not the source for the replication destination"
- Snapvault/QSM: replication destination could not set up temporary directory: No space left on device
- Some LUNs do not show under lun show command after transfter from 7-mode to ONTAP 9 by SnapMirror
- Space guarantee changes dynamically or after reboot, unknown cause or explanation
- Speed/duplex mismatch on Ethernet interface or Interface Group (ifgrp)
- SRA reports error during failover: Failed to create snapshots of replica devices - Unable to add the initiators passed in SRM input to initiator group
- SSH public key authentication asks for password after ONTAP upgrades to 8.2.5 7- Mode
- SSH/HTTP login using trusted domain user fails due to DC response STATUS_ACCESS_DENIED
- Stale sub-volume exports after recreating volume or qtree with the same path
- Storage efficiency space savings appear not to be retained during 7MTT transition
- Storage systems connected to a Cisco UCS host cannot connect or ping with jumbo frames enabled on a VLAN tagged interface
- sysconfig -r shows spare disk in Awaiting savecore state
- System configuration error occurs with CIFS clients when create_ucode default is set to off
- SYSTEM CONFIGURATION WARNING reported by the storage system
- System Console session via the Service Processor corrupted by serial console port
- System error 1240 encountered when attempting to connect to a controller from a CIFS client
- SYSTEM_BOOT_FAILED (POST failed) - AutoSupport message
T
- Takeover caused by multiple disk failures
- TCP Reassembly Queue Overflows Lead to Poor Performance and Possible Application Disruption on 8.2.5P2 7-mode or ONTAP 9.1P16
- TDP SnapMirror between on-premise 7-Mode system and Cloud Volume ONTAP fails
- The 7-Mode option rc4.enable is not persistent across reboots
- The command disk assign all fails when Disk Ownership is blank instead of Unowned
- The etc/messages file is empty
- The ongoing migration project on 7MTT goes missing after a power outage
- The partner's system ID is missed in "SYSCONFIG -A"
- The quota report shows 0 usage for CIFS and NFS users when administrator unintentionally took ownership of files when setting permissions
- The recommended value for vscan options timeout for Data ONTAP 7-Mode
- Time skew between storage system and Windows domain causes authentication failures during CIFS setup
- Top SLES Issues/Workarounds/Best Practices for NFS v3/v4.0
- Top Windows NFSv3.0 Issues, Workarounds and Best Practices
- Transition of 7-Mode SnapLock Mirror fails to resync in ONTAP 9
- Troubleshooting Connectivity or Reachability issues (Clustered Data ONTAP) in 7MTT
- Troubleshooting Workflow: AutoSupport failed to deliver
U
- Unable to access cifs.homedir - A device attached to the system is not functioning
- Unable to access etc$ directory for 7-Mode upgrade or login with Windows credentials
- Unable to activate quotas on a newly created volume on a vFiler unit
- Unable to add a system to the 7-Mode Transition Tool due to error: Failed to communicate with the host using TLS or SSL protocols
- Unable to add C-mode storage to the 7-Mode Transition Tool
- Unable to change the date in Data ONTAP 8.x
- Unable to complete "cf giveback" when cifs users have open files
- Unable to convert 10111 error to warning causing 7MTT precheck to fail
- Unable to create volume clone due to license DB being unavailable
- Unable to delete a project from 7-Mode Transition Tool(7MTT)
- Unable to display 7-Mode volume's contents when accessed from the root C$ path
- Unable to gather data from 7MTT Assessment report
- Unable to install new version of 7-MTT as another version is already installed on windows
- Unable to login to filer using CBC based Ciphers for SSH after upgrade to 8.2.5P5
- Unable to mount NFS export using kerberos and getting permission denied error
- Unable to Mount on 7mode system after Node failover
- Unable to post file while receiving connection refused and timeout error
- Unable to read files from a share when vscan is enabled in 7-mode
- Unable to reclaim the space freed by files that have been deleted
- Unable to run "cf: forcetakeover -d" since remote synchronous mirroring is not enabled
- Unable to run 7MTT after the installation
- Unable to send network traffic over Cisco Nexus vPC with ip.fastpath enabled
- Unable to SSH into Node due to invalid key length
- Unable to SSH to Data ONTAP 7-Mode node, other commands fail with "too many open files in system"
- Unable to SSH to management IP on controller after Ontap upgrade to 8.2.5x 7-Mode
- Unable to start uninitialized SnapVault Restore operation
- Uncorrectable memory error on Data ONTAP 8 7-mode
- Unidentified/New Disk Error: Device qualification failure
- Unix Host Access Denied error when mounting export from Vfiler using local Netgroups
- Users cannot access Network Drives in 7Mode
- Users unable to access CIFS shares encounter STATUS_NO_LOGON_SERVERS in 7-mode
- Using License Keys with Data ONTAP 8.1 7-Mode
V
- VEEAM backups fail with generally poor system performance during and after VEEAM rescans
- Volume clone split fails on volume recently transitioned from 7-Mode
- Volume type displays as TMP in ONTAP after using the 7MTT tool
- Volumes checked for transition are missing from the 7MTT project
- Vulnerability Risk. NFS ports are open over e0M interface
W
- What are alternatives to Active IQ Digital Advisor to gather performance reports for 7-mode systems?
- What are CRC and underrun errors?
- What are native and mixed modes, and how do I tell what mode is operating on the client?
- What are stateid, in-use owners, free owners, client count, and lease count in NFSv4 implementation of NetApp shared storage?
- What are the best practices for Physical Relocation of filers?
- What are the CIFS statistics to be collected for individual user sessions?
- What are the common causes of CIFS SETUP failures?
- What are the details of Network File System (NFS) Lock Recovery and Network Status Monitor?
- What are the effects of options ip.ping_throttle.drop_level 0 on system environment?
- What are the maximum Fibre Channel (FC) queue depth settings per port for each controller?
- What are the methods of perfstat collection for Data ONTAP 7-mode?
- What are the repercussions of a full aggregate?
- What are the SNMP trap categories?
- What can stand for options cifs.trace_login in 7-mode?
- What causes ESX VMFS to "disappear"?
- What does link-monitoring logic failed mean ?
- What does raid.media_scrub.enable option do?
- What does the order of listed target ports mean in the output of igroup show?
- What happens when a disk fails and does not have a hot spare installed?
- What is Filer NIS slave on Data ONTAP?
- What is high_security.enable in 7-Mode?
- What is Snapshot autodelete and how is it used in 7-mode?
- What is the autosupport.support.proxy option in Data ONTAP 7-mode?
- What is the default, minimum, maximum, and recommended value for cifs.tcp_window_size in Data ONTAP 7-Mode?
- What is the difference between the deprecated options command cifs.restrict_anonymous.enable and cifs.restrict_anonymous?
- What is the explanation of the cifs.restrict_anonymous option and its effects on null user access?
- What is the lock manager protocol
- What is the method to clear or kill a hung rsh or ssh process?
- What is the order of commands in the /etc/rc file?
- What is the performance impact on NAS when using FPolicy in Data ONTAP 7-mode?
- What is the quickest way to copy folder / files out of a snapshot - back onto homedir on the filer?
- What is the recommended tuning for Windows Terminal Server (WTS) CIFS clients?
- What is the Support Statement for dNFS on Data ONTAP 7-Mode and clustered Data ONTAP FAS?
- What Kerberos Encryption Types are supported with NAS protocols for Data ONTAP 8 7-mode?
- What method can transfer Data ONTAP 7-Mode CIFS local user and group settings to ONTAP 9
- What parameter or option do we need to in ONTAP 8 (7 mode), to change to permit 256KB rsize and wsize?
- What share permissions should be defined to allow FPolicy to screen files in Data ONTAP 7-mode
- What TCP ports does FlexCache use between the cache and the origin?
- What to do from the client host after changing SSH key length
- What triggers an update to Disk, Shelf, or ACP firmware in Data ONTAP 8 7-Mode?
- When a directory is dragged / dropped or moved, why are the access rights not inherited?
- When using 7-Mode Transition Tool (7MTT) is it possible to have the transitioned data automatically encrypted?
- Where can the 7 Mode MetroCluster documentation be found
- Which version of SP should be installed with Data ONTAP 8.1x or earlier?
- Why am I getting a SPARES LOW warning?
- Why do Large 3-way, NDMP restores fail with Quantum Libraries, the Filer and a backup client like Veritas, or Reliaty?
- Why does host file system and management softwares show different space usage than ONTAP?
- Why is my Data ONTAP 7-mode SnapVault taking a long time?
- Why is the client side I/O traffic high while the disk read is low in Data ONTAP 7-mode?
- Why is the reported LUN latency higher than the volume latency in Data ONTAP 7-Mode?
- Windows Server KB5008380 / CVE-2021-42287 in Enforcement mode breaks ONTAP 7-Mode CIFS Authentication
- WORM files have 0 retention after migration from 7-mode