Skip to main content
NetApp Knowledge Base

Will NDE Scale work after changing default vMotion TCP IP stack

  1. Last updated
  2. Save as PDF
Views:
215
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

Applies to

  • NetApp Deployment Engine 1.8

Answer

You can modify default vMotion TCP/IP stack and NDE Scale will still let you expand existing HCI cluster

Additional Information

By using the vMotion TCP/IP stack, vSphere vMotion traffic can be assigned a default gateway on its own subnet and can go over layer 3 networks. The vMotion TCP/IP stack is not available in the default vDS vmkernel wizard, and therefore the vmkernel adapter must be created directly on the ESXi hosts.

tcpip2.PNG

tcpip.PNG

Use this article to create the vMotion TCP/IP stack on the ESXi host

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.