Skip to main content
NetApp Knowledge Base

How long does it take for the changes to update at the serial number to reflect on Active IQ Page

  1. Last updated
  2. Save as PDF
Views:
398
Visibility:
Public
Votes:
6
Category:
not set
Specialty:
generalsupport
Last Updated:

Applies to

Active IQ Page

Answer

This article describes the procedure that should be followed by the customer to update changes made at the serial number on Active IQ Page.

Unlike the Support Site, the changes made at the serial number level would not reflect immediately on 'Active IQ Page'. Any changes made in the database would reflect in these additional tools within 24 hours approximately, from the time changes are updated.

If the changes are not visible in the ASUP tool after 24 hours, create a non-technical case for the Data Management using the following link:
http://support.netapp.com/eservice/assistant.

By selecting the category 'Service contracts>Service contract data discrepancies,' a case will be created and routed to the Support Contract Administration (SCA) team.

Additional Information

Missing storage node serial number in NetApp SolidFire Active IQ 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.