ifgrp shows broke while member ports are physically up with lag_inactive after DIMM replacement
Applies to
ONTAP 9
Issue
- After DIMM replacement with no cable reseated, ifgrp shows status
broke, while member ports arelag_inactiveinIFGRP-STATUS.txt:
a0b: 0 links, transmit 'IP Load balancing', Ifgrp Type 'lacp' fail 'default', Timer 'long'
Ifgrp Status Broke Addr_set
lag_inactive:
e2c: state lag_inactive, since 31Aug2021 18:48:14 (00:32:50)
mediatype: auto-10g_sr-fd-up
flags: lacp enabled
input packets 0, input bytes 0
input lacp packets 0, output lacp packets 621
output packets 618, output bytes 76632
drops (if) 0, drops (link) 0, drops (no active link) 0
up indications 2, broken indications 1
indication: lag_inactive at 31Aug2021 18:48:14
consecutive 0, transitions 3
e1c: state lag_inactive, since 31Aug2021 18:48:13 (00:32:51)
mediatype: auto-10g_sr-fd-up
flags: lacp enabled
input packets 0, input bytes 0
input lacp packets 0, output lacp packets 622
output packets 619, output bytes 76756
drops (if) 0, drops (link) 0, drops (no active link) 0
up indications 2, broken indications 1
indication: lag_inactive at 31Aug2021 18:48:13
consecutive 0, transitions 3
- Member ports are physically up, show ports down in
ifgrps.xml:
| node | ifgrp-name | distr-func | lacp | mac | activeports | ports | up-ports | down-ports |
+-----------------+------------+------------+----------------+-------------------+-------------+-------+----------+------------+
| node1netapp0102 | a0b | ip | multimode_lacp | xx:xx:xx:xx:xx:xx | none | e1c | | e1c |
| | | | | | | e2c | | e2c |