Skip to main content
NetApp Knowledgebase

Disk remains "testing" status in "sysconfig -r"

Views:
250
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • FAS8200

Issue

  • The disk starts testing on Disk 0d.10.3 and into the maintenance pool.


Example for EMS log:

Thu Feb 20 03:54:54 JST [node-02: config_thread : raid.disk.maint.start:notice ]:Disk 0d.10.3 Shelf 10 Bay 3 [NETAPP X343_SSKBE1T8A10 NA01] S/N XXXXXXXX] UID
[5000C500:C144C6DF:00000000:00000000]will be tested.

 

  • After a while,"sysconfig -r" is still in maintenance status, but confirmed by "sysconfig -a", the disk is failed status.

Example for "sysconfig -a" and "sysconfig -r":

・sysconfig -a


NetApp Release 9.5P6: Wed Jul 10 19:00:56 EDT 2019
    System ID: XXXXXXXXXX (node-02); partner ID: XXXXXXXXXX (node-01)
    System Serial Number: XXXXXXXXXXXX (node-02)

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8072 rev. C, SAS, <UP>)
                10.3 : NETAPP X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (XXXXXXXX) (Failed)

    slot 0: SAS Host Adapter 0d (PMC-Sierra PM8072 rev. C, SAS, <UP>)
              10.3 : NETAPP   X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (XXXXXXXX) (Failed)

・sysconfig -r


Maintenance disks

RAID Disk    Device      HA SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------    ------      ------------- ---- ---- ---- ----- --------------    --------------
testing     0a.10.3     0a    10  3   SA:B   0   SAS 10000 1713523/3509295616 1716957/3516328368 (fast zeroed)

 

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support