Skip to main content
NetApp Knowledge Base

Disk remains in broken pool after disk replacement

Views:
722
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF systems
  • FAS systems
  • ONTAP 9

Issue

  • Failed disk info remains in sysconfig -a output even after replacing the disk.

    slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
        Firmware rev:       01.12.09.00
        Base WWN:           5:00a098:XXXXXX:a0
        Phy State:          [0] Enabled, 6.0 Gb/s
                            [1] Enabled, 6.0 Gb/s
                            [2] Enabled, 6.0 Gb/s
                            [3] Enabled, 6.0 Gb/s
        QSFP Vendor:        Amphenol        
        QSFP Part Number:   112-00178+A0    
        QSFP Type:          Passive Copper 5m ID:00
        QSFP Serial Number: APF16XXXX444W

03.2: NETAPP X316_HAKPE06TA07 NA00 5614.6GB 520B / sect (AAAAAAAA) (Failed

 

  • The replaced disk displays in both Spare pool and Broken pool.

Pool0 spare disks

RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB / blks) Phys (MB / blks)
--------- ------ ------------- ---- ---- ---- ----- ----- ----- --------- --------------
spare 3b.03.2 3b 3 2 SA: B 0 FSAS 7200 5614621/11498743808 5625872/11521787400

Broken disks

RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB / blks) Phys (MB / blks)
--------- ------ ------------- ---- ---- ---- ----- ----- ----- --------- --------------
failed 0a.03.2 0a 3 2 SA: A 0 FSAS 7200 5614621/11498743808 5625872/11521787400

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.