Skip to main content
NetApp Knowledge Base

E-Series replacement controller does not complete boot up process

  1. Last updated
  2. Save as PDF
Views:
510
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

  • NetApp E-Series
  • Controller Platforms: E2800, E5700 and associated EF-series
  • All E-Series SANtricity OS

Issue

  • After a Controller Replacement the replacement controller does not complete Start-Of-Day (SOD). The controller may be in OE LU lock down after five reboots.
  • Automatic code syncronization fails on the replacement controller. The following errors are seen during SOD process:
05/27/22-13:28:41 (sntpEventTask): NOTE: sntpEventHandler:SOD not complete; skipping NTP sync.
05/27/22-13:29:01 (tRAID): ERROR: utilMessaging protocol connect status -1 errno 65
05/27/22-13:29:01 (tRAID): ERROR: ACS error connecting to download manager
05/27/22-13:29:01 (tRAID): NOTE: ACS: download manager is idle
05/27/22-13:29:01 (tRAID): NOTE: ACS: autoCodeSync(): Process start. Comm Status: 1
05/27/22-13:29:01 (tRAID): NOTE: ACS m_AltUnifiedACSMode: 1
05/27/22-13:29:04 (tRAID): NOTE: ACS required -sync from Drives:false
05/27/22-13:29:04 (tRAID): NOTE: ACS: autoCodeSync(): Waiting for Dom0 image transfer to complete.
05/27/22-13:29:11 (sntpEventTask): NOTE: sntpEventHandler:SOD not complete; skipping NTP sync.
  • The Alternate original Controller will show the following during the SOD process for the replacement:
05/27/22-11:12:49 (iacTask5): NOTE: ACS: Acs Needed on Alt: Yes, StateCode: 1, ReasonCode = 4
05/27/22-11:12:49 (iacTask5): NOTE: PN3acs19NativeForeignClientE:constructor
05/27/22-11:12:49 (iacTask5): NOTE: NativeForeignClientManager::Connecting/Reconnecting
05/27/22-11:12:49 (iacTask5): NOTE: NativeForeignClient::initialize: m_Port=20012, m_AltHost=dom0-alt
05/27/22-11:12:52 (iacTask5): NOTE: PN3acs19NativeForeignClientE::handle_close
05/27/22-11:12:52 (iacTask5): NOTE: PN3acs19NativeForeignClientE:destructor
05/27/22-11:12:52 (iacTask5): ERROR: NativeForeignClient::initialize: error=No route to host
05/27/22-11:14:22 (tVkiTimer): WARN: AcsManager::allowRebootOnTimeout(): allowing ctlr reboots

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.