Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • E-Series replacement controller does not complete boot up process
      https://kb.netapp.com/on-prem/E-Series/Hardware-KBs/E-Series_replacement_controller_does_not_complete_boot_up_process
      After a Controller Replacement the replacement controller does not complete Start-Of-Day (SOD). 05/27/22-13:28:41 (sntpEventTask): NOTE: sntpEventHandler:SOD not complete; skipping NTP sync. 05/27/22-...After a Controller Replacement the replacement controller does not complete Start-Of-Day (SOD). 05/27/22-13:28:41 (sntpEventTask): NOTE: sntpEventHandler:SOD not complete; skipping NTP sync. 05/27/22-13:29:04 (tRAID): NOTE: ACS: autoCodeSync(): Waiting for Dom0 image transfer to complete. The Alternate original Controller will show the following during the SOD process for the replacement: 05/27/22-11:12:49 (iacTask5): NOTE: ACS: Acs Needed on Alt: Yes, StateCode: 1, ReasonCode = 4