Skip to main content
NetApp Knowledge Base

Incorrect speed on management interfaces

Views:
45
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

Applies to

  • NetApp Element software
  • NetApp SF-series
  • NetApp H-series
  • Management interfaces (eth2 or eth3)

Issue

  • Switch reporting incorrect speed setting (lower than 1Gbs)
    %EC-5-CANNOT_BUNDLE2: Gi3/0/8 is not compatible with Gi3/0/9 and will be suspended (speed of Gi3/0/8 is 100M, Gi3/0/9 is 1000M)
    %EC-5-CANNOT_BUNDLE2: Gi3/0/11 is not compatible with Gi3/0/12 and will be suspended (speed of Gi3/0/11 is 10M, Gi3/0/12 is 1000M)

     
  • From storage node:
    # ethtool eth2
    Settings for eth2:
    <omitted>
            Speed: Unknown   (expected: 1000Mb/s)
            Duplex: Unknown  (expected: Full) 
    <omitted>

     
  • No alerts in NetApp SolidFire Active IQ (limited fault detection on management interfaces)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device