Skip to main content
NetApp Knowledge Base

Remote Device ID not showing in 'network port' output

  1. Last updated
  2. Save as PDF
Views:
656
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
CORE
Last Updated:

Applies to

  • FAS systems
  • AFF systems

Issue

  • Remote device ID information not showing in network port show output, but the ports are online and CDP is enabled:
moab-cluster1::*> network port show -role cluster -fields remote-device-id
node             port remote-device-id
---------------- ---- -----------------------------
moab-cluster1-01 e0a  moab-cluster-sw1(FOC2345R15W)
moab-cluster1-01 e0b  moab-cluster-sw2(FOC2345R1BP)
moab-cluster1-01 e0c  moab-cluster-sw2(FOC2345R1BP)
moab-cluster1-01 e0d  moab-cluster-sw1(FOC2345R15W)
moab-cluster1-02 e0a  -
moab-cluster1-02 e0b  -
moab-cluster1-02 e0c  -
moab-cluster1-02 e0d  -
  • Port health information may also not report properly:
Node: moab-cluster1-02
                                                                       Ignore
                                                  Speed(Mbps) Health   Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
--------- ------------ ---------------- ---- ---- ----------- -------- ------
a0a       Default      -                up   9000  auto/10000 -        -
a0a-110   Default      FrontEnd         up   1500  auto/10000 -        -
a0a-160   Default      Corporate        up   1500  auto/10000 -        -
a0a-69    Default      Storage          up   9000  auto/10000 -        -
e0M       Default      Management       up   1500  auto/1000  -        -
e0a       Cluster      Cluster          up   9000  auto/10000 -        -
e0b       Cluster      Cluster          up   9000  auto/10000 -        -
e0c       Cluster      Cluster          up   9000  auto/10000 -        -
e0d       Cluster      Cluster          up   9000  auto/10000 -        -
  •  device-discovery show output reports the correct data:
moab-cluster1::*> net device-discovery show
  (network device-discovery show)
Node/       Local  Discovered
Protocol    Port   Device                    Interface         Platform
----------- ------ ------------------------- ----------------  ----------------
moab-cluster1-02/cdp
            e0M    A-Site-N9K1(FOX2111P8QL)  Ethernet101/1/7   N9K-C9504
            e0a    moab-cluster-sw1(FOC2345R15W)
                                             Ethernet1/1/3     N3K-C3132Q-V
            e0b    moab-cluster-sw2(FOC2345R1BP)
                                             Ethernet1/1/3     N3K-C3132Q-V
            e0c    moab-cluster-sw2(FOC2345R1BP)
                                             Ethernet1/1/4     N3K-C3132Q-V
            e0d    moab-cluster-sw1(FOC2345R15W)
                                             Ethernet1/1/4     N3K-C3132Q-V

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.