Replaced disk not visible in a MetroCluster with ATTO 6500N FibreBridges
Applies to
- Fabric-Attached MetroCluster
- ATTO 6500 FibreBridge
Issue
- New replacement disk still show as failed after been replaced:
SYSCONFIG-A
Switch1:3.126L32 : NETAPP X423_HCOBE900A10 NA02 857.0GB 520B/sect (Failed)
Switch2:3.126L214 : NETAPP X423_HCOBE900A10 NA02 857.0GB 520B/sect (Failed)
Switch1:3.126L32 : NETAPP X423_HCOBE900A10 NA02 857.0GB 520B/sect (Failed)
Switch2:3.126L214 : NETAPP X423_HCOBE900A10 NA02 857.0GB 520B/sect (Failed)
STORAGE-DISK
- Path updated with new disk
Disk: switch1:3.126L32
Shelf: 8
Bay: 5
Serial: 62C0A01UJ4YR
Vendor: NETAPP
Model: X423_TA15E900A10
Rev: NA00
(...)
Power cycle on error: 0
Current owner: 4294967295
Home owner: 4294967295
Reservation owner: 0
- Path that still show the old disk
Disk: switch2:3.126L214
Shelf: 8
Bay: 5
Serial: W8GP9J0X
Vendor: NETAPP
Model: X423_HCOBE900A10
Rev: NA02
(...)
Current owner: 536950837
Home owner: 536950837
Reservation owner: 536950837
- Section
sastargets
in affected ATTO 6500N FibreBridge logs does not show the replaced drive.