Applies to ATTO 7600N ATTO 7500N ONTAP 9.3+ Description This article describes how to collect log files from an ATTO 7500N/7600N FibreBridge in 9.3 and later In-band management does not need to be con...Applies to ATTO 7600N ATTO 7500N ONTAP 9.3+ Description This article describes how to collect log files from an ATTO 7500N/7600N FibreBridge in 9.3 and later In-band management does not need to be configured for the data collection to be executed in-band
ATTO Bridge Firmware v3.17/v3.20 One or more ATTO FB7500N devices experience unexpected reboots The bridge event log shows an error similar to the below: CRIT FC Chip Error, Status: 0x81000000, Error1...ATTO Bridge Firmware v3.17/v3.20 One or more ATTO FB7500N devices experience unexpected reboots The bridge event log shows an error similar to the below: CRIT FC Chip Error, Status: 0x81000000, Error1: 0x52004C6A INFO ST[1ba12000-1ba13000] | FP[1ba12b8c] CPSR[60000193] INFO 0014ba9c<-00264ce4 | SP[1ba12b90] FP[1ba12bfc] INFO 001d8cdc<-00d2844c | SP[1ba12c48] FP[1ba12f74] INFO 00d27f98<-00d0d3d0 | SP[1ba12f78] FP[1ba12fa4] INFO 00d0d33c<-00d13324 | SP[1ba12fa8] FP[1ba12fcc]
Can different shelves and IOM modules be mixed in the same stack in a MetroCluster? IOM12 and IOM6 can be mixed in the same stack if the ONTAP version supports shelf mixing and dedicated IOM12 and IOM...Can different shelves and IOM modules be mixed in the same stack in a MetroCluster? IOM12 and IOM6 can be mixed in the same stack if the ONTAP version supports shelf mixing and dedicated IOM12 and IOM6 stacks can be created. The shelf models currently allowed to be mixed in a stack are DS2246, DS4243, and DS4246, with only one transition between IOM3 and IOM6. (Check in Hardware Universe for supported modules in an ONTAP release).
Applies to MetroCluster ATTO FibreBridge Answer The limited support version information can be found in the following Customer Product Communiques (CPC): ATTO 6500N ATTO 7500N ATTO 7600N End of Versio...Applies to MetroCluster ATTO FibreBridge Answer The limited support version information can be found in the following Customer Product Communiques (CPC): ATTO 6500N ATTO 7500N ATTO 7600N End of Version Support Date 1.62 and earlier 2.80 and earlier CPC-00093 August 2019 2.95 and earlier CPC-00202 August 2020 3.20 and earlier 4.20 and earlier CPC-00499 December 2023 Additional Information How to upgrade the ATTO FibreBridge Firmware What issues are resolved in the ATTO FibreBridge Firmware
ATTO Fibrebridge firmware 3.16 and 4.16 might cause disk drives to go into error recovery mode during a disk firmare update ATTO web interface displays misformatted output for the dumpconfiguration co...ATTO Fibrebridge firmware 3.16 and 4.16 might cause disk drives to go into error recovery mode during a disk firmare update ATTO web interface displays misformatted output for the dumpconfiguration command not correctly displayed in the ATTO web interface Incorrect dual-path configurations to the same ATTO 7500N FibreBridge might cause disk ownership issues Hot adding or removing a shelf in quick succession to an ATTO 7500N FibreBridge might cause a misdirected I/O
Applies to ATTO 6500N ATTO 7500N ATTO 7600N MetroCluster Description This article describes how to collect log files from an ATTO FibreBridge using the serial console.
[cluster01_1: sanown_io: diskown.diskHasWrongInfo:error]: Disk MMP1-FCSW-2:3.126L4 (S/N S2GUNCAH206819) has ownership information for disk MMP1-FCSW-2:3.126L3 (S/N S2GUNCAH206838) on it. [cluster01_1:...[cluster01_1: sanown_io: diskown.diskHasWrongInfo:error]: Disk MMP1-FCSW-2:3.126L4 (S/N S2GUNCAH206819) has ownership information for disk MMP1-FCSW-2:3.126L3 (S/N S2GUNCAH206838) on it. [cluster01_1: sanown_io: diskown.diskHasWrongInfo:error]: Disk MMP1-FCSW-2:3.126L3 (S/N S2GUNCAH206838) has ownership information for disk MMP1-FCSW-2:3.126L7 (S/N S2GUNCAH206808) on it.
Applies to ONTAP 9.5 and later Storage/Disk is attached through FiberChannel initiators All disks have up to date Firmware installed Issue Event log reporting hourly messages for disks with downrev fi...Applies to ONTAP 9.5 and later Storage/Disk is attached through FiberChannel initiators All disks have up to date Firmware installed Issue Event log reporting hourly messages for disks with downrev firmware: disk.fw.downrevWarning:error xx disks have downrev firmware
