ONTAP upgrade from 9.7 to 9.8 ONTAP upgrade from 9 to 9.7 or 9.7X Cannot access OnCommand System Manager after ONTAP upgrade System Manager (OnBox, hosted by cluster) is inaccessible using a web brows...ONTAP upgrade from 9.7 to 9.8 ONTAP upgrade from 9 to 9.7 or 9.7X Cannot access OnCommand System Manager after ONTAP upgrade System Manager (OnBox, hosted by cluster) is inaccessible using a web browser with generic network timeout error SSL certificate authentication for the cluster is found to be disabled The apache.error log will report the following error for the cluster admin vserver.
This article provides the solution when the EMS "csm.mismatchRemoteDevice" message in event log is caused due to the two-node switchless cluster configuration
Applies to Active IQ Unified Manager 9.x (OVA/RHEL/Windows) Security events with an impact area of "Upgrade", generated by ActiveIQ platform Issue Why does Active IQ Unified Manager only generate secu...Applies to Active IQ Unified Manager 9.x (OVA/RHEL/Windows) Security events with an impact area of "Upgrade", generated by ActiveIQ platform Issue Why does Active IQ Unified Manager only generate security, firmware or bug related events once per day?
Applies to OnCommand Workflow Automation Windows operating system Description A general uninstall of WFA does not remove all components of WFA There are traces left in the filesystem and registry whic...Applies to OnCommand Workflow Automation Windows operating system Description A general uninstall of WFA does not remove all components of WFA There are traces left in the filesystem and registry which can cause issues if you do another install This article is to explain how to remove all traces of a previous WFA installation
Applies to Brocade FC Switch When trying to change the licensing method on Brocade FOS version 8.1.0b as admin, the following error occurs: switch1:admin> licenseport --method dynamic RBAC permission ...Applies to Brocade FC Switch When trying to change the licensing method on Brocade FOS version 8.1.0b as admin, the following error occurs: switch1:admin> licenseport --method dynamic RBAC permission denied. The POD method has been changed to dynamic. Please reboot the switch now for this change to take effect. Following a reboot, the licensing method remains on the original setting: 24 ports are available in this switch 1 POD license is installed Static POD method is in use
Applies to System Manager 9.7 New UI. ONTAP System Manager 9.8 ONTAP System Manager 9.9 Issue Unable to turn on or off the Snapshot visibility within System Manager after upgrading ONTAP to 9.8
Active IQ Unified Manager 9.7P1 (AIQUM ) MySQL service in AIQUM 9.7P1 Windows will not start MySQL service in AIQUM 9.7P1 vApp (Virtual Appliance) will not start MySQL fails to start: [ERROR] [MY-0126...Active IQ Unified Manager 9.7P1 (AIQUM ) MySQL service in AIQUM 9.7P1 Windows will not start MySQL service in AIQUM 9.7P1 vApp (Virtual Appliance) will not start MySQL fails to start: [ERROR] [MY-012639] [InnoDB] Write to file ./ib_logfile1 failed at offset 13468958720, 1048576 bytes should have been written, only 958464 were written. Check that your OS and file system support files of this size. Check also that the disk is not full or a disk quota exceeded.
ONTAP System Manager 9.8 and newer A feature to directly upload disk firmware, shelf firmware, SP/BMC firmware and the disk qualification package (DQP) is available in ONTAP System Manager 9.8 and lat...ONTAP System Manager 9.8 and newer A feature to directly upload disk firmware, shelf firmware, SP/BMC firmware and the disk qualification package (DQP) is available in ONTAP System Manager 9.8 and later versions. Starting with ONTAP 9.9.1, you can receive alerts in System Manager from Active IQ Unified Manager that inform you when firmware updates are pending on the cluster. Click More (3 dots) in the top right corner of the Overview page and select ONTAP Update from the drop-down menu.
Applies to OnCommand Insight (OCI) 7.3.x EMC Solutions Enabler EMC SYMCLI Issue The capacity information for EMC arrays is not reported accurately when compared with EMC's own monitoring tools. An err...Applies to OnCommand Insight (OCI) 7.3.x EMC Solutions Enabler EMC SYMCLI Issue The capacity information for EMC arrays is not reported accurately when compared with EMC's own monitoring tools. An error similar to the following is seen in the OCI WebUI: The "symcfg list -srp"" CLI command may return incorrect data when collection with Solutions Enabler 8.1.0 or earlier from a Solutions Enabler server 8.3 or later.
