Spare disk shows container type unknown after replacement
Applies to
- ONTAP 9
Issue
- After disk replacement container type shows unknown, disk is assigned and shows as spare from
sysconfig -r
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
Spare disks for block checksum
spare 0c.35.23 0c 35 23 SA:A 0 SSD N/A 381304/780910592 381554/781422768- The disk is also only seen on 2 of the 4 expected paths for 2 nodes in Multipath-HA configuration in the
storage disk showcommand output:
nonpfas100::> storage disk show -disk 5.35.23
Disk: 5.35.23
Container Type: unknown
Owner/Home: node1 / node1
DR Home: -
Stack ID/Shelf/Bay: 5 / 35 / 23
LUN: 0
Array: N/A
Vendor: NETAPP
Model: X438_PHM2400MCTO
Serial Number: 3530XXXXXXXXX
UID: 500000000:2C000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
BPS: 520
Physical Size: 372.6GB
Position: present
Checksum Compatibility: block
Aggregate: -
Plex: -
Paths:
LUN Initiator Side Target Side Link
Controller Initiator ID Switch Port Switch Port Acc Use Target Port TPGN Speed I/O KB/s IOPS
------------------ --------- ----- -------------------- -------------------- --- --- ----------------------- ------ ------- ------------ ------------
node02 3b 0 N/A N/A AO INU 500003962c88298a 37 12 Gb/S 0 0
node02 0c 0 N/A N/A AO RDY 500003962c882989 6 12 Gb/S 0 0Errors:
-